T O P I C R E V I E W
|
sic91sleeper
Member # 779
|
posted
In 1996 mustangs does it use a speedo gear or does it have to be done electornically?
|
T-TopTerror
Member # 480
|
posted
It still uses a gear in the tranny but there is a sensor hooked up to the gear and sends a signal to the comp. then to the gauge. Hope this helps
|
sic91sleeper
Member # 779
|
posted
Thanks, is the gear in the tranny tailshaft???
I already have the gear.
Just a thought too.....
Say u have stock gears and u put a 4.10 gear in. i know the speedo wouldnt be correct but wouldnt that keep your miles lower on the odomter than they really would be???
|
T-TopTerror
Member # 480
|
posted
Yes- it's in the tailshaft...
No- it should be reading a faster than you're going speed after the install. This is just racking up those unused miles.
|
03DOHC
Member # 1450
|
posted
No, you would see like 80mph on the speedo and everyone will be blowing by you.
I wouldn't use a different plastic gear to adjust your speedo after a gear swap. Take it to a speedometer shop and have them make a mechanical compensator for you. I've seen too many plastic gears melt. It's not a matter of if, it's when. Sure they only cost a few bucks or so, but you will be changing it out more than once.
|