T O P I C R E V I E W
|
86_on_DD_machs
Member # 11083
|
posted
My friend picked up some heads and can't find the right head gasket for these head. He is also have some trouble identifying the heads. On the side they say edelbrock performer oe-d-215-16 and by the valve springs it has 6025.
Anyone run these head an can help out
|
SLOWSN95
Member # 8269
|
posted
Theyre edelbrock performer heads.. not sure on intake valve size but exhaust valves should be a 1.60. Just run a Felpro pt9333.
Have the heads checked out by a machine shop and possibly have them resurfaced.
|
86_on_DD_machs
Member # 11083
|
posted
quote: Originally posted by SLOWSN95: Theyre edelbrock performer heads.. not sure on intake valve size but exhaust valves should be a 1.60. Just run a Felpro pt9333.
Have the heads checked out by a machine shop and possibly have them resurfaced.
Thanks, They have already been resurfaced an one more questions there they suppose to have a curve line with 2 water ports
[ 2013-12-22, 07:48 PM: Message edited by: 86_on_DD_machs ]
|
LXjames
Member # 10791
|
posted
I have these heads on my coupe and I'm running the pt9333 like said above and as recommended by turbo50
|
86_on_DD_machs
Member # 11083
|
posted
quote: Originally posted by LXjames: I have these heads on my coupe and I'm running the pt9333 like said above and as recommended by turbo50
Cool thanks for the help fellas
|
SLOWSN95
Member # 8269
|
posted
quote: Originally posted by LXjames: I have these heads on my coupe and I'm running the pt9333 like said above and as recommended by turbo50
Dan recommended those gaskets to me as well. Yes, my heads have that curve in them too.
|
jessdawg5.0
Member # 12815
|
posted
I am also runnin these heads with the same gaskets stated above and have had no problems just make sure everything is torqued down correctly and you should be fine
|