T O P I C R E V I E W
|
sleeping stallion
Member # 8162
|
posted
i have a quick question so i finally got around to installing the blower on the coupe. but i ran into something the tensionser is htting on the water pump. the car has a ac delete with no pulley. the power steering was moved up. is there any way to fix this with out going in to deep
|
Greasy
Member # 5258
|
posted
A '93 Cobra water pump pulley will fix it, but they're hard to find. I know racsirx has a fix for it too.
|
87droptop50
Member # 7185
|
posted
Just run a smaller water pump pulley or buy the trickflow AC delete
|
sleeping stallion
Member # 8162
|
posted
i see if i was to run a ac delete would i need to replace the powersteering back.
|
moeofit32
Member # 10393
|
posted
What lee came up with doing and worked awsome had no belt slip was he added another free rolling pully on the bracket for my setup..there was a thread about it in general talk believe the topic was pully issue on blower set up or something like that [ July 03, 2012, 01:19 PM: Message edited by: moeofit32 ]
|
sleeping stallion
Member # 8162
|
posted
thanks a bunch ima look for it
|
nitrous_bob
Member # 77
|
posted
the AC delete you have is for a factory NON AC car. i would look at vortechs tech pages to see how they show the install for a non AC car
|
sleeping stallion
Member # 8162
|
posted
i used lees idea worked out great and only set me back 15 bucks
|
1986cobra
Member # 9443
|
posted
post a pic of it?
|
illwill510
Member # 3788
|
posted
whats the $15 fix? post a pic please
|
racsirx
Member # 1710
|
posted
|