T O P I C R E V I E W
|
p5.0
Member # 6160
|
posted
Ok here's what I got. 306 short block , Afr 185's heads with 1.7 stud mount rockers and paxton supercharger 8 psi. It's for a carb setup. What cam should I go with ? B cam. And victor Jr intake? also were can I get a blow through carb that will work with the setup. And fuel pump which one. Thanks cafords
|
sydewayzLX50
Member # 10217
|
posted
i would think a b-cam is kinda small for that setup. i personally cany recommend a good one for you but i think you could find something more suitable for that combo than a b-cam
|
p5.0
Member # 6160
|
posted
would a f cam be to big with the 1.7rockers. or should i go the trick flow stage 1 if the b cam is to small.
|
95gtdrop
Member # 7478
|
posted
i would think an f cam would be fine, the tfs cam or just get a custom ground one from comp cams
|
2BlueGeeTees
Member # 4702
|
posted
Holley black fuel pump a Holley blow thru carb and if you really want a ford cam than stick with an F cam as far as the rockers make sure you check piston to valve clearance with a check spring installed. However custom cams for a pushrod are really not that much more expensivethan an OTS cam
|
70mach351
Member # 7528
|
posted
csu makes a good blow through carb, i ran a quick fuel for my last one and then coverted it to efi. Warhorse has it now and it runs like a champ. id stay away from the holley brand or demon blow though carbs. THere is a few on yellow bullet and corral right now for sale for 400 or so.
|