T O P I C R E V I E W
|
Jmir018
Member # 1414
|
posted
OK, my car was originally an automatic, I dumped the aod and installed a tremec 3550 and some basic mods. As of this weekend the car will have trickflow aluminum heads, tfs intake and crane cam. larger injectors and maf meter also. I hear all this things about computers and some people say some are better than others. Could anyone please teach me how that goes? Also, if I was going to get a chip, would the type of computer I have matter or will the chip override all that? thanks. Will it be worth getting a chip with the mods I have? I'm really done with the engine in this car. I plan on working in suspension and looks from now on. thanks
|
92stangLX
Member # 3252
|
posted
Your stock computer should work fine as long as the maf is properly calibrated to the injector size.
You may have some idle problems but I am guesing you should be able to sort these out. The car will drive kinda funny for a bit until it "learns" the new mods.
That all being said, you would benefit from getting a custom tune. It will sort out any driveability issues and you should be able to pick up some power in the process.
If you do get a chip down go with an SCT custom chip. There are a few good tuners here on this site that can hook you up
|
SilverLX351
Member # 3207
|
posted
It will run great as long as all the sensors are good, fuel pressure's right, timings set, TPS is right, etc.
See you tomorrow Jersey
|
JohnB
Member # 969
|
posted
It will run rich if the computer was originally for an auto application.
If you install a chip, it will not matter as to what computer you have.
|
|