T O P I C R E V I E W
|
gercolla1
Member # 3068
|
posted
I need a bumpsteer kit for a fox body/rack using 96 sn95 spindles.There are kits for up to 93 and 94 and so on.Which do I order?And are the competition engineering sets from summit any good?They cost like $130 there.
|
mtbaughs
Member # 4052
|
posted
You need to order a set for whatever year the rack is. So in your case for a fox body. I would not order the competition engineering brand as I found the sleeves to run too short to work on all cars. I've always used the ones from Griggs Racing. I'm sure MM ones are good as well. [ April 22, 2005, 10:11 PM: Message edited by: mtbaughs ]
|
cdog301
Member # 5136
|
posted
hey man do not I say again do not use 1996 spindles they are too long and they take your track width out too far 1/2 inch will rub badly learn from my mistake get some 1994/5's ! good luck
|