T O P I C R E V I E W
|
50sneak
Member # 8533
|
posted
My 5.0 starts without engaging the clutch Does anybody know how to do neutral safety switch in Sacramento or even give me a clear step by step please because the ones online are horrible lol
call or text me 9164162992
|
Wht86drop
Member # 12104
|
posted
Did you change the transmission harness? And I think you should be able to add the switch because the connector should be there already. The connector should be jumped by a looped wire or something like that. I could be wrong but it's a start
|
FivePTSlow
Member # 7682
|
posted
quote: Originally posted by Wht86drop: Did you change the transmission harness? And I think you should be able to add the switch because the connector should be there already. The connector should be jumped by a looped wire or something like that. I could be wrong but it's a start
This is correct. You need the 5 speed trans tunnel harness for it to work correctly. Once you have the harness in place, you need to plug in all the connections to the clutch pedal assembly and it will work fine.
|
50sneak
Member # 8533
|
posted
I bought it with the conversion done, just not this part, I think the harness is inside, do anyone of you guys know where a video is to do this?
|
Wht86drop
Member # 12104
|
posted
The transmission harness is under the carpet on the driver side. You'll see it on the tunnel. Replace that and you should be good
|
racsirx
Member # 1710
|
posted
First you need to find out if they jumped it at the pedals or the transmission, it's probably at the pedal, that's where I do it since the switch sometimes goes bad, look for the green/pink wires and see if they are jumped, why do you want to change it? It's better for the clutch if you leave it the way it is.
|