T O P I C R E V I E W
|
9165pt0
Member # 7625
|
posted
I hear the stock explorer valve springs are the same as, or a tad worse than stock e7 valve springs. But who here has actually ran them with a stock ho cam? Do they hold up to 5200rpm? Let me know, Im sure theres atleast a few on here that slapped on the heads without doing anything to them.
|
SIC9250
Member # 8216
|
posted
I've ran a trick flow stage 1 cam on those heads stock valve springs,never had an issue valve train wise,until a rod let go lol
|
SLOW95GTS
Member # 10365
|
posted
The only problem with the springs is that they arent meant to run up to 5200-6250 rpm, if i were you id just buy the Alex springs for 100 bucks and be safe on it. I would hate to take iron heads on and more than once.
|
Duncan Motors
Member # 7045
|
posted
rumurs are no more than 480 lift, some say 514 lift, ive ran a e cam with 1.7s before with no problems, but i was stupid, dont run performnce stuff on 30 year old spring period.
|
9165pt0
Member # 7625
|
posted
ok thanks for info guys
|