T O P I C R E V I E W
|
86 T TOPS
Member # 8855
|
posted
hey folks I'm still having an issue getting my pump to prime . I haved replaced the fp relay ecc relay and still no power to the pump, there are only two wires gettin power out the fp tree , the orange/blue witch goes to starter relay and red/black wire that goes to ecc both has power the pink/black witch powers the fp doesn't for got to mention that the inertia switch does have power ive done some research but have really gotten no where . HELP !!!!!
|
racsirx
Member # 1710
|
posted
You need to measure voltage starting from the solenoid, computer, relay, interia switch , then pump, I have had bad grounds and fusible links cause fuel pump problems, check ground the ground next to the battery first.
|
5.0 LsX
Member # 10017
|
posted
ive seen a few problems with the harness between the relay and switch where very little voltage gets to the pump try bypassing it from the relay
|
86 T TOPS
Member # 8855
|
posted
ECM,FP RELAY,INERTIA SWITCH ALSO HAS POWER . THE PINK/BLACK WIRE FROM THE FP RELAY THAT FEEDS POWER TO THE PUMP DOESNT HAVE ANY VOLTAGE !
|
93lx4cyl
Member # 10517
|
posted
Pick up coil?
|
|