T O P I C R E V I E W
|
68dustin
Member # 5388
|
posted
im always having to re-tighten my header bolts or replace them. After a few months they either fall out or loosen up.. whats a really good/easy header bolt to install that wont back out?
|
OneFastNotch.
Member # 9537
|
posted
arp'
|
Adam5.0
Member # 6995
|
posted
purple threadlocker
|
underconstructiongt
Member # 7378
|
posted
purple or red theadlocker and the bolts with the locks on them that worked for my lx, or you can check your bolts every 2 weeks and keep tighting them, also make sure you tight them to 40ft lbs of pressure thats the most important part!!!
|
84SVOrick
Member # 9039
|
posted
You need the in long header bolts from arm
|
RAP66
Member # 3360
|
posted
I used copper gaskets & stage 8 bolts.
|
SnakeBit
Member # 8871
|
posted
I always use remflex header gaskets with ARP bolts. The trick is to tighten as normal. Then go for a ride and get it up to temp. As soon as you park tighten again. I never have to touch them after that. It works!
|
JZTRK
Member # 7641
|
posted
I bought the header bolts with the lock wire that runs through the center
|
cali95gt
Member # 8940
|
posted
Remflex gaskets with stage 8 locking bolts... Make sure you install the locks on them or they will back out... What's better than a lock???
|
68dustin
Member # 5388
|
posted
http://www.summitracing.com/parts/PHP-20010/?rtype=10 anybody try these?
|
REDLIGHTING
Member # 11296
|
posted
^^^^^^ Those look good
|
Cobra 93-4992
Member # 4992
|
posted
quote: Originally posted by cali95gt: Remflex gaskets with stage 8 locking bolts... Make sure you install the locks on them or they will back out... What's better than a lock???
These the ones with the wire locks right. Can't get much better
|
moeofit32
Member # 10393
|
posted
copper gasket and stage 8 FTW if the screws back out normally u can jus tighten back up copper wont blow atleast i never did and stage 8s work well
|
xchpstang
Member # 1206
|
posted
Stage 8 with a decent gasket always worked for me back when I had my Fox.
|
dvuspny
Member # 10949
|
posted
I use the Earls' header gaskets with the changeable graphite gasket inserts. They are affordable at bout $45. The great thing is if you ever choose to remove the header the inserts areare the only part needing changed at $8. for the pack of 8. For Header bolts i always use "Stage 8." However an old skool trick was to wrap header bolts with teflon tape. ...Loc-tite makes a paste stick version of white sealer specifically for vibrations as well.
|