T O P I C R E V I E W
|
Tony Montana
Member # 8288
|
posted
I have a 68 302 j code motor im starting a rebuild on. Im interested in running a hydraulic flat tappet cam with .488 int and .488 exh.Duration 284 284. For the meantime i plan on throwing in some gt40 heads would this combo work? Im not looking for a ton of power just something to bump performance . [ June 20, 2011, 05:06 PM: Message edited by: Tony Montana ]
|
turbo50
Member # 6700
|
posted
Should run good. If that is the summit cam it is actaully made by comp cams which is pretty decent.
|
Tony Montana
Member # 8288
|
posted
Thanks for the advice its actually an Erson i just ran across a deal for it some lunati lifters and pushrods as a combo. I just wanted to hear soem opinions before i close the deal.
|
ISP89LX
Member # 8949
|
posted
Any info just ask dan aka TURBO50, always give great advice and will be realistic with you...hes very good with his builds and knows his windsor's...
|