T O P I C R E V I E W
|
Maxoctane
Member # 1466
|
posted
I'm working on a 95 Mustang 3.8/auto. The speedo and odometer stopped working. Other gauges work fine. Is this the cluster? Or is there a sensor in/on the trans that sends the speedo/odo signal? Thanks for all replies!
|
Maxoctane
Member # 1466
|
posted
Anyone??
|
Nastysvt
Member # 6431
|
posted
most likely its the sensor that connects to the tranny. thats liked to the speedo
|
Maxoctane
Member # 1466
|
posted
Yea I think you're right. Gonna check that first.
|
Maxoctane
Member # 1466
|
posted
Replaced the Vehicle Speed Sensor. Still no speedo or odo. Any Ideas? [ June 24, 2010, 12:44 AM: Message edited by: Maxoctane ]
|
Blind
Member # 3052
|
posted
is there a speedo cable from the VSS in the trans? could be stuck/broken.
if there is, remove the VSS and driven gear from the side of the trans, chuck it into a drill and spin it while somebody watches the speedo to see if it moves, try both directions.
if there's no speedo cable you can still do the same thing just have the key in run so the ecu is on
that will help narrow it down.
|
Maxoctane
Member # 1466
|
posted
quote: Originally posted by Blind: is there a speedo cable from the VSS in the trans? could be stuck/broken.
if there is, remove the VSS and driven gear from the side of the trans, chuck it into a drill and spin it while somebody watches the speedo to see if it moves, try both directions.
if there's no speedo cable you can still do the same thing just have the key in run so the ecu is on
that will help narrow it down.
Good call. Thanks!
|