T O P I C R E V I E W
|
MustangNate
Member # 4559
|
posted
I have a 1990 LX, 4cyl/auto hatch. Also have a 1995 GT(aode) I just picked up.
Question basically is; Can I swap ALL the suspension, engine, tranny stuff from the '95 to the '90 without too much hassle?
What would I have to do in order to SMOG the '90LX with all the '95 stuff on it? Thanks.
|
Blind
Member # 3052
|
posted
personally I would get a `87-`93 intake manifold, headers, smog pump, h-pipe, tab/tad/egr solenoid, egr sensor/spacer setup, and a 1990 wiring harness and computer (most is junkyard'able for pretty cheap).
if you just drop it straight in with all of the `95 stuff, you would run into issues 1) wiring the car, and 2) when it comes time to smog it won't look like a stock 1990 5.0
suspension wise, I would just swap everything straight over, it will fit fine, just be careful with what wheels/tires you run in the rear because of the wider track width of the `95's rearend vs a fox. [ August 26, 2008, 01:17 PM: Message edited by: Blind ]
|
|