T O P I C R E V I E W
|
uh0h50
Member # 3125
|
posted
i purchased the wiring kit from PA Performance and received it in the mail. I am going to purchase a 95 Mustang 3g alternator today as well. The instructions that came with the wiring kit are pretty clear, but it doesn't state that I will need any other materials in order to complete this swap. Anybody wanna give me any kind of input please? What else is needed besides the alternator and the wiring kit from PA Performance?
edit: i know how to route the wiring, and i know that i will need to do some clearancing to the stock alternator bracket. Just want to know what other materials i will needs besides the wiring kit and the alt. itself. [ January 19, 2007, 12:18 PM: Message edited by: uh0h50 ]
|
92stangLX
Member # 3252
|
posted
You should be good to go. Here is an article on the installation
http://www.mustangmonthly.com/howto/26599/
|
uh0h50
Member # 3125
|
posted
success! everything went well. the only hard part about the install was the fact i had to use a hacksaw to modify the alt. bracket. other then that, it went smoothly...
|
Eddie306
Member # 2354
|
posted
call javier if you need any info.
|
92stangLX
Member # 3252
|
posted
quote: Originally posted by uh0h50: success! everything went well. the only hard part about the install was the fact i had to use a hacksaw to modify the alt. bracket. other then that, it went smoothly...
Good shit A dremmel works best for clearancing the bracket. That's what I used.
|
uh0h50
Member # 3125
|
posted
quote: Originally posted by 92stangLX: quote: Originally posted by uh0h50: success! everything went well. the only hard part about the install was the fact i had to use a hacksaw to modify the alt. bracket. other then that, it went smoothly...
Good shit A dremmel works best for clearancing the bracket. That's what I used.
I wish I had a dremel. I was going at it with that damn hacksaw for a good 45 minutes... the ghetto mexican way
|
uh0h50
Member # 3125
|
posted
quote: Originally posted by Eddie306: call javier if you need any info.
i did, that fool doesn't answer his phone, or at least my calls..
|