T O P I C R E V I E W
|
droptp50
Member # 5546
|
posted
i have a 89lx with heads and intake and a 70mm throttle body i was wondering what sieze mass air flow to buy ? i have stock injectors
|
92stangLX
Member # 3252
|
posted
I would run the stock MAF until you change the injectors. When you do just get a pro-m 73mm, 76mm, 80mm, or whatever. I don't think the MAF is a big restriction on your setup. The most important thing is to get one that is properly calibrated.
|
JohnB
Member # 969
|
posted
How is a stock MAF not causing a restriction on that setup? Pick up a 76mm C&L with the correct sample tube. That way when you upgrade injectors, you can just swap the the tube...not the whole unit.
|
droptp50
Member # 5546
|
posted
quote: Originally posted by JohnB: How is a stock MAF not causing a restriction on that setup? Pick up a 76mm C&L with the correct sample tube. That way when you upgrade injectors, you can just swap the the tube...not the whole unit.
nice yea i was looking at the c&l 76mm right on man thanks
|
50DADDY
Member # 3076
|
posted
quote: Originally posted by JohnB: How is a stock MAF not causing a restriction on that setup? Pick up a 76mm C&L with the correct sample tube. That way when you upgrade injectors, you can just swap the the tube...not the whole unit.
Yeah! Heads and intake not restricted by a stock,lame-ass 55mm throttle body,whatever! Something else you can do is use a later model air meter from a 94 or later stang or a Mark 8 air meter.Just swap in your 19lb sensor.
|
droptp50
Member # 5546
|
posted
quote: Originally posted by 50DADDY: quote: Originally posted by JohnB: How is a stock MAF not causing a restriction on that setup? Pick up a 76mm C&L with the correct sample tube. That way when you upgrade injectors, you can just swap the the tube...not the whole unit.
Yeah! Heads and intake not restricted by a stock,lame-ass 55mm throttle body,whatever! Something else you can do is use a later model air meter from a 94 or later stang or a Mark 8 air meter.Just swap in your 19lb sensor.
i believe stock throttle body is a 60mm
|
50DADDY
Member # 3076
|
posted
quote: Originally posted by droptp50: quote: Originally posted by 50DADDY: quote: Originally posted by JohnB: How is a stock MAF not causing a restriction on that setup? Pick up a 76mm C&L with the correct sample tube. That way when you upgrade injectors, you can just swap the the tube...not the whole unit.
Yeah! Heads and intake not restricted by a stock,lame-ass 55mm throttle body,whatever! Something else you can do is use a later model air meter from a 94 or later stang or a Mark 8 air meter.Just swap in your 19lb sensor.
i believe stock throttle body is a 60mm
Uhhh...air meter i mean(t)!
|