T O P I C R E V I E W
|
gercolla1
Member # 3068
|
posted
Among other things,I noticed in the dark that the coil was arc'ing onto itself. I saw tiny little sparks going from the red plastic body to the outer square metal housing. Odd? or what?
|
1968_Fastback
Member # 1482
|
posted
Mine was doing that too. Infact every coil i put on my Jeep did that. I just put a MSD coil on my 95 and i put the 95s stock coil on my Jeep and its not doing it yet. I am kinda nervous about my 95 though. The coil i put on the 95 was arcing when i put it on the Jeep and its brand new
|
Blind
Member # 3052
|
posted
I would check the engine grounds, or just add another one from one of the heads to the swaybar bolts on the frame rail.
|
1968_Fastback
Member # 1482
|
posted
my grounds are fine.
|
getjobdone
Member # 4666
|
posted
mine did this when i put on some new msd 8.5mm wires. i noticed that the boot didn't completely cover the metal which ibelieve was the cause of the arcing. i then realized i had the coil wire on backwards and when i switched it around the boot completely covered the metal part. i haven't seen any arcs since...
|