T O P I C R E V I E W
|
HAD A RED90GT
Member # 520
|
posted
If I were to put on a edelbrok intake with a 65mm throttle body an stock heads?
|
st5150
Member # 51
|
posted
Maybe 1 MPH? I believe in the drag racing forum FasterDamnit posted that he installed a cobra intake on his stocker combo and only picked up something like .33 mph, but ran 102 mph more consistantly. I'm sure he'll chime in here with the exact numbers.
|
shade-tree
Member # 298
|
posted
it is safe to assume you will get 10 hp out of that switch.
roughly 1 mph.
I got a similar gain from a MAF/TB and explorer intake (1 mph ish).
Long tubes were worth nearly two for me, but by then I already had an intake so it's not apples:apples.
|
FasterDamnit
Member # 442
|
posted
Well- My intake was ported and was a bad mismatch w/ the heads intake ports. I think it was a solid 1mph and 1 tenth. With an intake that the ports actually line up nicely you should see a .2 to .25 improvement in ET. The Performer is a good choice for stock to mild heads. If you can find one used you will pleased w/ the performance vs. cost...
JL
|