Author
|
Topic: 2001 saleen upgrade rotors?
|
project_stangs88
¯
Member # 4599
|
posted
My buddys 01 saleen has what looks like 10 inch rotors all around..he trying to go to 13inch.. what car does he order them from. .direct bolt on that will work with his stock calipers? Cross drilled would be nice..thanks cafords
-------------------- got my 65 mustang back! (bonny)! roller...
Posts: 1518 | From: Sunnyvale | Registered: Jun 2004
| :
|
|
SwEeT03Gt
¯
Member # 10283
|
posted
what looks like? better double check, and you cant just fit 13" rotors on factory gt brakes, he might want to just upgrade to cobra, mach 1's or bullitt brake calipers and rotors
Posts: 4484 | From: -NicKlE n DiMe- | Registered: Sep 2010
| :
|
|
project_stangs88
¯
Member # 4599
|
posted
Looks like as in.stock I'm guessing....do mach 1's come with 13in rotors?
-------------------- got my 65 mustang back! (bonny)! roller...
Posts: 1518 | From: Sunnyvale | Registered: Jun 2004
| :
|
|
70stang351w
¯
Member # 9948
|
posted
Blue Hawk pads & ss lines front and back would be a big improvement , otherwise get the adapter kit for the rear and i believe he can use his stock calipers on that. for the fronts its cobra for 13inch rotors and calipers. The 4v's with the 13rotors have the same calipers with slight differences like bracket location .its been awhile since looking in to it.
Did the 03 cobras with hawk blue pads and mm ss lines on the front and just bought replacement rotors and remanufactored calpers and ss lines for the rear. Works great [ 2013-05-20, 03:08 PM: Message edited by: 70stang351w ]
-------------------- 1996 GT VERT /32v MOD - SOLD 1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
project_stangs88
¯
Member # 4599
|
posted
^ thanks ..I told him that but he dnt want the calipers to say cobra on them. .is there any other caliper that will accept 13in rotors?
-------------------- got my 65 mustang back! (bonny)! roller...
Posts: 1518 | From: Sunnyvale | Registered: Jun 2004
| :
|
|
SwEeT03Gt
¯
Member # 10283
|
posted
quote: Originally posted by project_stangs88: ^ thanks ..I told him that but he dnt want the calipers to say cobra on them. .is there any other caliper that will accept 13in rotors?
mach 1 and bullitt have 13" rotors and dont say cobra on them they have a horse on them. you can go to autozone and just buy replacement calipers
i just upgraded my stock rubber hose for ss lines made a night and day difference (stock gt brakes) also went with dot 4 brake fluid
Posts: 4484 | From: -NicKlE n DiMe- | Registered: Sep 2010
| :
|
|
project_stangs88
¯
Member # 4599
|
posted
quote: Originally posted by SwEeT03Gt: quote: Originally posted by project_stangs88: ^ thanks ..I told him that but he dnt want the calipers to say cobra on them. .is there any other caliper that will accept 13in rotors?
mach 1 and bullitt have 13" rotors and dont say cobra on them they have a horse on them. you can go to autozone and just buy replacement calipers
i just upgraded my stock rubber hose for ss lines made a night and day difference (stock gt brakes) also went with dot 4 brake fluid
Would those calipers bolt rite on to his spindle? Also to his stock caliper bracket?
-------------------- got my 65 mustang back! (bonny)! roller...
Posts: 1518 | From: Sunnyvale | Registered: Jun 2004
| :
|
|
SwEeT03Gt
¯
Member # 10283
|
posted
not 100% sure so i will let someone chime in on that
Posts: 4484 | From: -NicKlE n DiMe- | Registered: Sep 2010
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
The Mach1 calipers are plain aluminum finish while the Bullitt is powder coated red with a silver horse inlay. The Caliper brackets will need to be from a Cobra, Mach1, or Bullitt which are all 13" setups. Any of the above calipers with the mentioned brackets will bolt right to the 94-04 spindles. The banjo bolts for the brake hoses are course or fine thread, make sure you get the correct ones. A set of steel braided hoses is recommended, a lot of these come with both types of banjo bolts.
-------------------- Tim (Musttanguy) 97 5.0 coupe 82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
project_stangs88
¯
Member # 4599
|
posted
quote: Originally posted by MUSTTANGUY: The Mach1 calipers are plain aluminum finish while the Bullitt is powder coated red with a silver horse inlay. The Caliper brackets will need to be from a Cobra, Mach1, or Bullitt which are all 13" setups. Any of the above calipers with the mentioned brackets will bolt right to the 94-04 spindles. The banjo bolts for the brake hoses are course or fine thread, make sure you get the correct ones. A set of steel braided hoses is recommended, a lot of these come with both types of banjo bolts.
Thanks for the info!
-------------------- got my 65 mustang back! (bonny)! roller...
Posts: 1518 | From: Sunnyvale | Registered: Jun 2004
| :
|
|
triple b
¯
Member # 8763
|
posted
My 13'' ford cobra calipers just bolt on to the 95 spindle no bracket needed. They are not painted, but I did the 13' cobra upgrade to m fox 5 yrs ago.. the rear has a special bracket to make the bigger disc work [ 2013-05-20, 09:09 PM: Message edited by: triple b ]
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|