Author
|
Topic: 5 speed swap help
|
89_Faleen
¯
Member # 10728
|
posted
So I'm doin a 5speed swap for a friend. It's a 90 lx 5.0 droptop. So everything is on but it won't go into gear when engine running I've adjusted the cable different ways nd still nothing?
-------------------- 1990 GT (SOLD) 1990 LX (SOLD) 1995 GT (SOLD) 1989 LX (SOLD) 1997 COBRA (RIP) 1989 FALEEN (CURRENT)
Posts: 275 | Registered: Mar 2011
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
do you have a quadrant, firewall adjuster or adjustable cable?
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
89_Faleen
¯
Member # 10728
|
posted
No everything is stock. Everything was used except clutch kit nd flywheel. I've tried slamming on the pedal up me down to adjust it but nothing. Also the clutch pedal is really stiff
-------------------- 1990 GT (SOLD) 1990 LX (SOLD) 1995 GT (SOLD) 1989 LX (SOLD) 1997 COBRA (RIP) 1989 FALEEN (CURRENT)
Posts: 275 | Registered: Mar 2011
| :
|
|
gercolla1
¯
Member # 3068
|
posted
clutch backwards?
-------------------- Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
Does it go into gear with car off.
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
wilber650
¯
Member # 10360
|
posted
Fork in place? Nd how sure r u that the tranny went in gear before installing?
-------------------- 2014 mustang Gt 2004 f150 fx4 1998 Cobra sold 1994 Gt sold
Posts: 522 | From: antioch | Registered: Oct 2010
| :
|
|
89_Faleen
¯
Member # 10728
|
posted
I'm pretty sure I put the clutch on right done a couple clutches already. Fork is on good. Tranny goes into to gear with car off. Don't knw anything about the tranny he just said he got it from haulinass
Posts: 275 | Registered: Mar 2011
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
Does it grind trying to go into gear with the car on? Or does it 100% block it out?
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
89_Faleen
¯
Member # 10728
|
posted
No grinding at all 100% blocked
Posts: 275 | Registered: Mar 2011
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
quote: Originally posted by S-BAYSTANG-J: No grinding at all 100% blocked
sounds like something in the Tranny is off. cause even with the clutch not pushed in at all you should be able to jam the car into gear an it would grind. blocking out 100% sounds like something inside the tranny is not right.
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
89_Faleen
¯
Member # 10728
|
posted
So pretty much tranny is done? I dis notice when I took the shifter of there was like mud build up with a couple of leaves inside took a pic of.
Posts: 275 | Registered: Mar 2011
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
quote: Originally posted by gercolla1: clutch backwards?
not possible
Posts: 22487 | From: Sacramento | Registered: Nov 2001
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
quote: Originally posted by S-BAYSTANG-J: I'm pretty sure I put the clutch on right done a couple clutches already. Fork is on good. Tranny goes into to gear with car off. Don't knw anything about the tranny he just said he got it from haulinass
If it shifts when off and not on there is def an issue in the clutch adjustment. If you have any question feel free to call me
408-420-3003
Posts: 22487 | From: Sacramento | Registered: Nov 2001
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
quote: Originally posted by Beastly GT500 TVS: quote: Originally posted by S-BAYSTANG-J: No grinding at all 100% blocked
sounds like something in the Tranny is off. cause even with the clutch not pushed in at all you should be able to jam the car into gear an it would grind. blocking out 100% sounds like something inside the tranny is not right.
Not necessarily true. If the clutch is not engaging at all it will keep the trans from going into gear. Jamming it into gear (often times it wont) can only damage the transmission. Have a customers car in the shop that came in with this same issue. His car was fine prior to a simple clutch and cable install at a "transmission shop". Stock "replacement" clutch and cable. Car will not shift into gear when the car is on. Have to put the car in gear, then start it just to move it. Putting an OEM Quadrant and Cable in to solve the issue.
Ive had past issues with aftermarket and parts store replacement clutch cables doing this same thing. Actually had one break before even backing out of the shop. Removed and installed a Ford OEM Unit and problem was solved.
Also make sure that the quadrant is in fact adjusting properly. There should be a series of clicks when doing so. Very common that they can be worn out and they simply will not have a proper adjustment left in it. They will catch the next "good" set of teeth and what you think is adjusted, is way off. [ December 03, 2011, 03:52 AM: Message edited by: HaulinAss Motorsports ]
Posts: 22487 | From: Sacramento | Registered: Nov 2001
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
I had this same problem when my clutch cable went bad. No matter how much I adjusted it I could not put my car into any gear while the car was running, so this sounds like there is an adjustment problem to me. Sounds like the clutch isn't being pushed in all the way. This is where the multi hook aluminum quadrant, firewall adjuster, and adjustable clutch cable come in really handy.
-------------------- 2011 GT/CS 5.0 + Boost(Procharger) 90 Bronco 5.8 Lifted 05 SRT-4 24PSI E-85 at least 50 million hp 07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
blown95svt
¯
Member # 8893
|
posted
quote: Originally posted by HaulinAss Motorsports: quote: Originally posted by gercolla1: clutch backwards?
not possible
.
Trust me it is! I've had to fix one that a guy did. I won't mention any names! Lol
-------------------- 95 cobra blown 331 gr40 suspension ***NEED QUALITY WORK FOR HALF THE PRICE? I DO SIDE JOBS! PM FOR DETAILS*** www.norcalmotorcompany.com
Posts: 1434 | From: roseville | Registered: Jan 2009
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
quote: Originally posted by blown95svt: quote: Originally posted by HaulinAss Motorsports: quote: Originally posted by gercolla1: clutch backwards?
not possible
.
Trust me it is! I've had to fix one that a guy did. I won't mention any names! Lol
How? It would be impossible to bolt the pressure plate to the flywheel with the disc backwards
Posts: 22487 | From: Sacramento | Registered: Nov 2001
| :
|
|
2T0NE
Go 49ers
Member # 4216
|
posted
quote: Originally posted by Beastly GT500 TVS: Does it grind trying to go into gear with the car on? Or does it 100% block it out?
i had the same problem,wouldnt go into gear when on but would when off,didnt think it was the clutch cuz it was brand new with 2k on it but it was,what happend was when i installed the clutch the cable was kinda tite and made the throwout bearing kinda ride on tge pressure plate therefor wearing out the face of the pressure plate ,not much but enough for it to not engage,you could clearly see the wear on both throwout bearing and pressure plate,both were new.........
so te way i fixed it was....new clutch,new throwout bearing AGAIN,and to address the issue i bought a steeda quadrant,adjustable cable and firewall adjuster,then i left the peddle with a bit of play so it wouldnt ride on preassure plate which could lead to the wear
-------------------- Originally posted by x Raelsmar x: Can't wait till the Giants lose tomorrow night so all you Giants fans are forced to shut the fuck up.
Posts: 14676 | From: 760 carlsbad | Registered: Mar 2004
| :
|
|
2T0NE
Go 49ers
Member # 4216
|
posted
you could just buy a new pressure plate ,i didnt have the time to order a spec 2 pressure plate,so i coukd re-use my disc,i had a soec 3 layin around
-------------------- Originally posted by x Raelsmar x: Can't wait till the Giants lose tomorrow night so all you Giants fans are forced to shut the fuck up.
Posts: 14676 | From: 760 carlsbad | Registered: Mar 2004
| :
|
|
89_Faleen
¯
Member # 10728
|
posted
So I took tranny of nd found clutch fork with a lot of wear and also one of the tabs streched out. So I closed the gap reinstaled everything now goes in to 1-4 but no 5 or rev. It grinds. Also its hard to go in 1-4 but they go in with engine running is it time for a new fork?
Posts: 275 | Registered: Mar 2011
| :
|
|
SPECIALTY15***MM PERFORMANCE***
¯
Member # 2978
|
posted
IVE DONT A FEW FIXS FROM PEOPLE PUTING CLUTCHS IN BACKWARDS BUT IT MAKES ALOT OF NOISE CLUTCH RUBBS ON FLYWHEEL BOLTS...SOUNDS TO ME YOU HAVE A WARN QUADRANT..U HAVE TO REMEMBER STOCK ONES ARE 10 PLUS YEARS OLD AND EVEN IF THEY WORKED BEFORE A NEW CLUTCH AND A NEW POSTION MY NOT PUT A ADJUSTABLE CABLE IN AND RETRY I CAN ALMOST GUARENTEE IT WILL WORK....I HIGHLY DOUBT THAT HAULIN WOULD SELL A BAD TRANS.
-------------------- MM PERFORMANCE 916-993-9581
Posts: 861 | From: sacramento | Registered: Jun 2003
| :
|
|
89_Faleen
¯
Member # 10728
|
posted
i will let owner know about this. Thanks for all the help. Quadrant sits about an inch from the opposite side of were the cable hooks to. Were can I get an adjustable cable at since he just got a brand new non adjustable clutch cable
Posts: 275 | Registered: Mar 2011
| :
|
|
|