|
Author
|
Topic: cobra keep blowing EEC fuse
|
FOXX5.0
¯
Member # 9094
|
posted
 
 
I was driving and out of no where my EEC fuse blew and car wouldn't turn on just turned over so I replaced the fuse and turned right on drove the car 20 min and the fuse blew again so I put in a new one and now once I turn the key it blows the fuse any ideas or where to look for a short
1997 cobra
Posts: 1554 | From: (~__~) | Registered: Apr 2009
| :
|
|
LXjames
¯
Member # 10791
|
posted
That's gonna be a short to ground most likely a rub through on the harness
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
FOXX5.0
¯
Member # 9094
|
posted
Double post lol ![[patriot]](graemlins/patriot.gif)
[ 2015-04-14, 11:32 AM: Message edited by: FOXX5.0 ]
Posts: 1554 | From: (~__~) | Registered: Apr 2009
| :
|
|
FOXX5.0
¯
Member # 9094
|
posted
I think I found the problem first thing I checked was the o2 sensors seen it on a thread somewhere do I gave it a check and found my rear o2 resting on my xpipe and melted
I disconnected the sensor and put in a fuse for the eec and it didn't blow the fuse time for a new o2 sensor and secure it away from the mid pipe
Posts: 1554 | From: (~__~) | Registered: Apr 2009
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
