Author
|
Topic: fox IRS swap driveshaft??
|
Blow_U_In_Reverse
¯
Member # 12298
|
posted
which driveshaft do I use with a t5 and irs in a foxbody?? can i use the stock 5.0 and just change the rear flange? or stock 03/04 cobra and change the front yoke? is the length gonna work on either one or will i have to get a custom driveshaft??
any help is appreciated..
-FiJi-
-------------------- "Real Men Get BLOWN" -1993 Cobra "COBRUUH" -1984 T-Top Notchback #KurganTuned
Posts: 2688 | From: FiJi-925-650 | Registered: Aug 2012
| :
|
|
90 7up lx
¯
Member # 10304
|
posted
Change the pinion flange in the rear end with with the one off a solid axle....then mock ip your t5 driveshaft if its too long then trim a lil bit off the yoke were it goes into the tranny...
Posts: 1266 | From: north valley | Registered: Sep 2010
| :
|
|
RSA-Mustang
¯
Member # 11540
|
posted
quote: Originally posted by 90 7up lx: Change the pinion flange in the rear end with with the one off a solid axle....then mock ip your t5 driveshaft if its too long then trim a lil bit off the yoke were it goes into the tranny...
+1 use your stock driveshaft and change the flange if IRS is 03-04, 99-01 IRS use the same flange which bolts right up. I used my stock driveshaft and didn't change flanges when swapping a 99 IRS a while back
Posts: 332 | From: San Francisco | Registered: Dec 2011
| :
|
|