|
Author
|
Topic: looking to upgrade my 2003 cobra
|
miggy
New Member
Member # 12630
|
posted
 
 
i have a 2003 cobr with 30,xxx looking to upgrade small things such as intake, exhaust, wheels, clutch, clutch cable, pulleys etc. but im not to familiar with this engine. anyone who has experiance in upgrading these monsters please suggests me any kind of combo of parts. also looking for some one to do my exhaust so if you want to recomend some one let me know wassup!! thank you PM me email me; miguelarrizon@gmail.com
Posts: 4 | From: hayward | Registered: Dec 2012
| :
|
|
Mr.10psi
¯
Member # 11062
|
posted
first of all welcome to the site dude.
Now for the boltons ill give you a quick insight.
You want to run 11.9x or so. Pulley, intake, tune, exhaust and 26" drag radial. Will make 450-470rwhp depending what pulley you use. If you install a set of 4.10s you will run 11.6 if you got some decent driving skills. Leave the clutch alone. It will be fine. As far as what parts to use. If it was me, i would put a jlt cold air or ram air intake or a k&n fipk , get the regular magnaflow 2.5 catback, not the magnapacks, bassani hi flow catted 2.5" x pipe. As far as the tune goes, go see shaun at aed. Now for the pulley i would run a billetflow upper pulley. Get a 2.76. For the tires run a hoosier drag radial for best times at the track on a radial. Street longevity wise their not the longest lasting. Ngk tr6 plugs gapped at .032 and a heat exchanger upgrade wouldnt hurt. Proper belt length will need to be found. Use gates. Get the idlers pulley if you can, they will help.
--------------------
02 white saleen(sold) 347 stroker in the works
Posts: 1337 | From: 530 | Registered: Jul 2011
| :
|
|
coupedup
¯
Member # 9987
|
posted
Yup^^ I made 476 wit my 03 termi wit just a 2.76 pulley, full bassani exhaust and a couple other little bolt ons.
![[patriot]](graemlins/patriot.gif)
Posts: 4406 | From: Ca | Registered: May 2010
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
