|
Author
|
Topic: Vortech Guys In Here Please
|
adower
¯
Member # 5955
|
posted
 
 
I am putting a vortech on my 93 cobra and have been reading about blow by. I plan to run 12lbs of boost and almost everything Ive read says to replace the PCV valve with some sort of setup. What is the most simple type of setup you guys run?
So far this looks the easiest. Turbo couple pcv valve with a little breather. Then a breather that screws or goes into the oil fill neck.
Heres a pic of the setup I found. What do you guys think? The little piece on the intake is the pcv valve I am guessing.
[ June 27, 2009, 09:27 AM: Message edited by: adower ]
--------------------
98 Cobra
Griggs
S Trim
HRE
Posts: 3327 | Registered: Aug 2005
| :
|
|
5LiterSpeeder
¯
Member # 8234
|
posted
I didnt have to do anything like that when i had an S-Trim on my motor. There was no blow by, maybe yours will be fine without it? I'd try it regular first. Good luck
--------------------
93'Ex 4cyl Notch TFS H/C/I 3.55s 4 wheel Cobra brakes, V2-SQ, 14 psi
RIP BRANDON, SILVERLX-
Posts: 561 | From: Healdsburg | Registered: Feb 2008
| :
|
|
Greasy
¯
Member # 5258
|
posted
I think it's called PCV "check valve", you should put breathers on both sides too....You can never have enough ventilation.
--------------------
'93 Cobra-Coyote Powered
'03 DSG Cobra
'13 Dodge Cummins
'14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
just go get a turbo coupe PCV valve, they seal off with boost. Stock mustang PCV valves do not. Plus run a breather on the oil fill.
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
95331StrimVert
¯
Member # 6250
|
posted
Great idea on the PCV from the Turbo Bird. How did you hook up? Doesn’t it have two vacuum ports?
--------------------
95331StrimVert
Posts: 398 | From: Martinez ca | Registered: Nov 2005
| :
|
|
asskickn88
¯
Member # 4957
|
posted
quote:
Originally posted by adower:
While Space Invaders is a good game I think Donkey Kong is a much better game.
On topic, I'm running the stock PCV setup on my truck with no issues. I had problems blowing the one out of my 95 GT but it had blow by so nothing was going to work for it.
[ June 28, 2009, 09:03 PM: Message edited by: asskickn88 ]
--------------------
Three 540 Bimmers and a 5.0 Explorer.... got a Ford back in the stable!
It's time for the country to do what Obama's own father did.
Abandon him.
Posts: 6069 | From: Rocklin, Ca | Registered: Oct 2004
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
