|
Author
|
Topic: e303 instll w stock heads?
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
 
 
Might throw in an e cam when I put on some other parts. Anyone know what needs to be replaced with the cam install? & will the cam cause valve float with the stock springs?
Im guessing a new timing chain, gaskets, & the water pump while its off is all I really need right?
--------------------
Signature Wheel Ford Representative
Email: Terrance@Signaturewheel.com
Instagram: @Signature_Wheel_Mustang
Web: www.SignatureWheel.com
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
waste of time IMO with E7's
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
stock e7's max lift is 500. new.. now the e303 has a 498 lift. so even with new springs you can run into problems. with stuff like binding & float..if you can i would change the springs out.
--------------------
WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143
77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
MikeD.
¯
Member # 8060
|
posted
Friend of mine just threw one in is stock motor, is sounded nice but honestly did nothing for him. Save a some money and pick up a used set of gt40s. You can find them for about 300 bucks, your going to spend that on a e303 and springs w/ misc parts for the install.
--------------------
1999 FRC Vette
12.77 @ 110
Posts: 2854 | From: Vacaville Ca, 707 | Registered: Nov 2007
| :
|
|
Greasy
¯
Member # 5258
|
posted
I ran a F-303 cam with 1.7's on stock heads and never had any problems with coil bind....
--------------------
'93 Cobra-Coyote Powered
'03 DSG Cobra
'13 Dodge Cummins
'14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
92stangLX
¯
Member # 3252
|
posted
quote:
Originally posted by Blind:
waste of time IMO with E7's
+1 ![[patriot]](graemlins/patriot.gif) Wait 'til u upgrade your heads before swapping out ur cam.
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
Good info. Thanks a lot guys. Ima wait & do my cam & heads all together then
--------------------
Signature Wheel Ford Representative
Email: Terrance@Signaturewheel.com
Instagram: @Signature_Wheel_Mustang
Web: www.SignatureWheel.com
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
MikeD.
¯
Member # 8060
|
posted
quote:
Originally posted by 50 Deep:
Good info. Thanks a lot guys. Ima wait & do my cam & heads all together then
Good idea
--------------------
1999 FRC Vette
12.77 @ 110
Posts: 2854 | From: Vacaville Ca, 707 | Registered: Nov 2007
| :
|
|
DVUS PNY
¯
Member # 9058
|
posted
slap the cam in with 1.6 rockers.
--------------------
I do side job repairs,& performance up-grades. Most make & model cars...
"DVUS Motorsports"
Posts: 259 | From: East Bay | Registered: Mar 2009
| :
|
|
SHORTSHIFTER89
¯
Member # 7810
|
posted
i put a e303 in with my stock motor and everything started floating and f--king up never do that again. just wait for the heads and rockers. oh and before the car started messing up it just sounded alittile louder thats about it noooo speed. just noise
--------------------
1989 Mustang 5.0 HCI NOW SUPERCHARGED
2013 Range Rover Sport
2011 Bmw 5501 twin turbo 530HP
1998 silverado c1500 cheyenne
Posts: 923 | From: 707 hillside | Registered: Jul 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
