Author
|
Topic: Estimate this head work please
|
SVT Fox
¯
Member # 1837
|
posted
I want to know what you guys think it would cost at any old shop to do this head work:
pressure and vacume test
deck both heads to correct warping
replace 3 exhaust valves
replace 1 intake valve.
thank you!!!
-------------------- 65 coupe 66 Coupe 92 Fobra 97 Cobra 98 Cobra 01 GT
Posts: 717 | From: 530/LA | Registered: Sep 2002
| :
|
|
1fast281
¯
Member # 4670
|
posted
For your 4.6 DOHC?
-------------------- 1998 Mark VIII LSC Black/Graphite 2005 Pontiac GTO Silver/Black
Posts: 578 | From: north bay | Registered: Jul 2004
| :
|
|
SVT Fox
¯
Member # 1837
|
posted
this is for pushrod 302 aluminum heads edelbrock performers
-------------------- 65 coupe 66 Coupe 92 Fobra 97 Cobra 98 Cobra 01 GT
Posts: 717 | From: 530/LA | Registered: Sep 2002
| :
|
|
SVT Fox
¯
Member # 1837
|
posted
well they are saying its 690 dollars! Im going to ask for a detailed bill thats all I can do at this point i guess.
-------------------- 65 coupe 66 Coupe 92 Fobra 97 Cobra 98 Cobra 01 GT
Posts: 717 | From: 530/LA | Registered: Sep 2002
| :
|
|
Iwanna347
¯
Member # 7077
|
posted
Pressure Test 80 for the pair Surface 70 to 80 for the pair Vacuum Test ? the shop I went to did this for free but he said if he did charge for it 25 The Valves depending on brand could run 10 or more a piece The seats probably need to be addressed in the the holes where the valves were replaced Did they do a complete valve job ?The valve seals could add another 30 or 40 to the job If he charges premium prices for a valve job his figure is easily reachable ..........expensive but reachable
Posts: 15 | Registered: Sep 2006
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
quote: Originally posted by SVT Fox: well they are saying its 690 dollars! Im going to ask for a detailed bill thats all I can do at this point i guess.
that is way too much
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
Cstang5.0
¯
Member # 4925
|
posted
quote: Originally posted by 1FAST89GT: quote: Originally posted by SVT Fox: well they are saying its 690 dollars! Im going to ask for a detailed bill thats all I can do at this point i guess.
that is way too much
i paid 220 for the same thing on some gt40p heads but it was only three valves [ June 29, 2007, 02:29 AM: Message edited by: Cstang50 ]
-------------------- 88 VERT slow sold 89 coupe stock ; ) 02 yukon 05 focus
Posts: 1638 | Registered: Oct 2004
| :
|
|
Iwanna347
¯
Member # 7077
|
posted
GT40P are cast normally you dont pressure test cast because a magnaflux will reveal a problem faster and easier not to say you cannot do it on them ..at the shop I go to in Sac a basic valve job is 120 so if you add a pressure test at 80 and a surface at 70 thats 270 add 60 for new valves you are at 330 ...Even if they charge 300 for a basic valve job they seem to be high for that kind of work
Posts: 15 | Registered: Sep 2006
| :
|
|
90lxfoxbody
¯
Member # 6947
|
posted
cylinder head package at most machine shops runs 350 for a complete valve job surface and p test.so ad 30 bucks for your valves and bamm thats where your at.
-------------------- Owner Of All Out Performance Ya I own that Cobra Old setup whipple and jug 9.37 155 New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|