|
Author
|
Topic: EFI CONVERSION INTO 62
|
FiftyMan302
¯
Member # 3801
|
posted
 
 
Pops and I are converting his pick-up into an
efi,we have his totalled mustang in the yard
so we want to use it for parts.
My question is that I know we could use the harness of the fifty but do we need to hook up any other wires???
Posts: 87 | From: Richmond/ Fairfield | Registered: Nov 2003
| :
|
|
Stan G
¯
Member # 6226
|
posted
what computer are you using ?
Depending on how much stuff your using from the mustang ( what year ?) you may have some wiring to do.
I have a write-up for wiring a 91 into an rx7 that i can send you if that will help
--------------------
1985 RX-7, 347/T-5 , T/F T/W heads, typhoon intake, Tfs2 cam, pulleys, 2500 lbs .
3.63 rear gears , Megasquirt
Posts: 105 | From: Sun Coast , Florida | Registered: Nov 2005
| :
|
|
FiftyMan302
¯
Member # 3801
|
posted
Im using everything of a 93 5.0
I believe the computer is a A9P
Posts: 87 | From: Richmond/ Fairfield | Registered: Nov 2003
| :
|
|
Stan G
¯
Member # 6226
|
posted
Send me your e-mail address and I'll send you my write-up.
Should be about the same , might want to compare the pinouts 91 v 93 .
Also the pick up / connections for the truck will be different than the rx-7, but mostly it is getting power and ground to the computer .
--------------------
1985 RX-7, 347/T-5 , T/F T/W heads, typhoon intake, Tfs2 cam, pulleys, 2500 lbs .
3.63 rear gears , Megasquirt
Posts: 105 | From: Sun Coast , Florida | Registered: Nov 2005
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
