|
Author
|
Topic: couple of stupid questions...
|
stangless
¯
Member # 1414
|
posted
 
 
ok.. so, i have a couple of questions. i'm looking forward to cleaning my engine bay a bit..
what's this? the little bracket thingy avove the brake lines..i've asked around noone knows... i've looked at pictures of people that have cleaned their engine bay and hidden all the wires but they alway leave that little piece... ![[Confused]](confused.gif)
what is unit? it's located on the passanger side. i've heard is for the ac unit? is that true? i no longer have ac.. can i simply remove it? there is a hose that goes to it.. what do i do with it in case i remove the it?
Thanks.
[ November 18, 2005, 02:39 AM: Message edited by: Jmir018 ]
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
losbadgts
¯
Member # 4394
|
posted
dawn jersey those are some stupid ?'s ![[Big Grin]](biggrin.gif)
did u ever bleed the brakes or are u stil waiting for me to come and help u.
--------------------
Why pretent someone u are not, everyone else could see it.
Posts: 3625 | From: redwood city | Registered: Apr 2004
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
first one grounds the hood when its closed, helps things not go *boom*
the 2nd, is the evap canister, it pressurizes the gas tank, and the other line goes to the upper intake manifold for vacume. Without it you'll throw a code and not pass smog.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by losbadgts:
dawn jersey those are some stupid ?'s
did u ever bleed the brakes or are u stil waiting for me to come and help u.
ha ha.. i'm posting them for you man.. you were asking me and i didn't know.. so i had to ask.
Thanks blind.
a couple of days ago i had to remove my upper intake to get a little more clearance. i paid no attention to where the vacum lines went. is there a vacum line going to the egr thingy on the tb?
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
losbadgts
¯
Member # 4394
|
posted
quote:
Originally posted by Jmir018:
quote:
Originally posted by losbadgts:
dawn jersey those are some stupid ?'s
did u ever bleed the brakes or are u stil waiting for me to come and help u.
ha ha.. i'm posting them for you man.. you were asking me and i didn't know.. so i had to ask.
Thanks blind.
a couple of days ago i had to remove my upper intake to get a little more clearance. i paid no attention to where the vacum lines went. is there a vacum line going to the egr thingy on the tb?
Haha very funny, so did u finish the brake system or what, cause if u did u need to help me find a maf
![[Frown]](frown.gif)
--------------------
Why pretent someone u are not, everyone else could see it.
Posts: 3625 | From: redwood city | Registered: Apr 2004
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
yeah the EGR needs a vacume line, it comes from the passenger strut tower area, one of those sensors on the back of it (TAB/TAD).
also, is that pic post brake swap?
that coupler block under the ground strap is where your adjustable proportioning valve should go. I hope you read up on that brake swap and got everything!
of course if you went 5 lug with rear drums you wouldn't need that, I just assume you put rear disc on.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
the second picture is the charcoal canister, emissions crap.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
NO MANRZ
¯
Member # 566
|
posted
Only god knows what the cheese grater part is there for. The hood is grounded by two strong metal hinges. I think they wised up on 94+ cars and removed the cheese grater.
[ November 18, 2005, 03:02 AM: Message edited by: NO MANRZ ]
--------------------
Bring It . . .
Posts: 1938 | Registered: Nov 2001
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by blind:
yeah the EGR needs a vacume line, it comes from the passenger strut tower area, one of those sensors on the back of it (TAB/TAD).
also, is that pic post brake swap?
that coupler block under the ground strap is where your adjustable proportioning valve should go. I hope you read up on that brake swap and got everything!
of course if you went 5 lug with rear drums you wouldn't need that, I just assume you put rear disc on.
I went with rear disks.. i don't know what you mean by coupler block.
the car i got all the pieces for the brake set up did not have a an adjustable valve so i figured i didn't need one....
is this the piece you are talking about?
I guess i can get one from ebay or something..is it necessary?
Carlos, i am not done yet. i need to bleed the brakes and i need someone to help me. ![[Wink]](wink.gif)
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
|
|
stangless
¯
Member # 1414
|
posted
is this the one?
i'll order it tomorrow..
thanks.
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
|
|
|
|
stangless
¯
Member # 1414
|
posted
thanks blind. luckily for me.. i didn't have to do most of the stuff that was there..
i mean.. the whole rearend was taken from a donor car. so i didn't have to deal with it. just a straight rearend swap. and connected the brakes. i'm still lagging about the e-brakes.. i've just been busy.
the front spindles were already set with calipers and all.. all i needed to do was remove the old ones and just drop in the new ones..
the hardest part was removing and installing the new brake booster....
i guess i'll order the adjustable valve tomorrow.
thanks again.
what is bench bleeding?
[ November 18, 2005, 04:08 AM: Message edited by: Jmir018 ]
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
quote:
Originally posted by Jmir018:
what is bench bleeding?
its a PITA and you dont need to do it with the pressure bleeder
![[patriot]](graemlins/patriot.gif)
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
quote:
Originally posted by blind:
quote:
Originally posted by Jmir018:
what is bench bleeding?
its a PITA and you dont need to do it with the pressure bleeder
can you explain what bench bleeding means, i always hear it and never know what theyre talking about
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
stangless
¯
Member # 1414
|
posted
yes.. i know i'm supposed to bench bleed it first.. but i don't even know what that is..
I just noticed that i'm gonna need an alingment pretty bad.. my driver side tire is poiting a little to the left(outisde .5") while the passanger is pretty straight..
hopefully i'll get all the parts on monday and have enough time to bleed the system and get this car aligned before sunday.
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
bench bleeding involves connecting lines from the output ports on the m/c, looped back to the top and then manually actuating the plunger rod in the rear of it until all the air bubbles are out of the fluid.
oh yeah, thats all done with the m/c OFF the car on a bench.
IMO - the $50 for a pressure bleeder and never having to do that makes it priceless
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
oh.. so i can use the pressure bleeder and skip the bench bleeding?
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
![[dance]](graemlins/dance.gif)
by myself!
