Author
|
Topic: porting pics
|
z pyro
¯
Member # 3745
|
posted
this is what I've done so far on this head. how does it look? keep in mind I don't yet have a gasket set to match the ports to, I'm just working on smoothing out the exhaust bumps and the valve guide bosses.
-------------------- '95 Integra LS '08 Buell XB12R Firebolt '65 Mustang 289 - soon to be 306
Posts: 1732 | From: Fresno, CA | Registered: Nov 2003
| :
|
|
MR GO FAST
¯
Member # 2088
|
posted
what heads are those?
-------------------- 1986 Gt that is faster than FOSTANGS pinto
Posts: 3729 | From: ATWATER/SANJO/RWC | Registered: Nov 2002
| :
|
|
z pyro
¯
Member # 3745
|
posted
E7's
-------------------- '95 Integra LS '08 Buell XB12R Firebolt '65 Mustang 289 - soon to be 306
Posts: 1732 | From: Fresno, CA | Registered: Nov 2003
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
Look pretty cool to me...The pics are in step, right?...The last pic looks to have the most porting...
It's too bad you don't have dyno numbers before and after...
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
vpr_klr
¯
Member # 3353
|
posted
pretty good for an at home port job Cast iron, shit, that must have taken you a looooong time!
-------------------- Project crustang has begun 14 mustangs and counting...
Posts: 893 | From: Livermore | Registered: Oct 2003
| :
|
|
JoeT
¯
Member # 298
|
posted
you really kicked those valve guides' ass!
if you're removing much material, I'd CC those heads if I were you just as a self-check, (difficult with EGR ports, I know)
-------------------- 1984 Ford Tempo AOD--- RIP
Posts: 6785 | From: San Jose | Registered: Jun 2001
| :
|
|
z pyro
¯
Member # 3745
|
posted
I thought CCing was only for combustion chambers? and I haven't even began to port match them.
-------------------- '95 Integra LS '08 Buell XB12R Firebolt '65 Mustang 289 - soon to be 306
Posts: 1732 | From: Fresno, CA | Registered: Nov 2003
| :
|
|
JoeT
¯
Member # 298
|
posted
when you port the shiznit out of the runners, put the valves back in and CC them, a good sanity check for your work.
-------------------- 1984 Ford Tempo AOD--- RIP
Posts: 6785 | From: San Jose | Registered: Jun 2001
| :
|
|
166 Merlo
FELONY MOTORSPORTS
Member # 1549
|
posted
what's cc?
-------------------- '89 - Boss Coupe '70 - Drop Cutthang '68 - Cougnut '87 - 0166, Its real
Posts: 3954 | From: Thebay | Registered: Jul 2002
| :
|
|
z pyro
¯
Member # 3745
|
posted
cubic centimeters, cc is used sometimes as a verb referring to measuring the volume of cylinders, combustion chambers, etc.
and what would i be looking for if i did cc the heads?
-------------------- '95 Integra LS '08 Buell XB12R Firebolt '65 Mustang 289 - soon to be 306
Posts: 1732 | From: Fresno, CA | Registered: Nov 2003
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
As far as I know shade- is talking about filling the the ports with a CC measured amount of liquid....Pour it into the ports or combustion chamber to see if teh port volume is the same with all of the ports...
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
season'd 88
¯
Member # 169
|
posted
[ April 20, 2004, 04:46 AM: Message edited by: season'd 88 ]
Posts: 1383 | Registered: Feb 2001
| :
|
|