|
Author
|
Topic: brake ??
|
carajo
¯
Member # 4426
|
posted
 
 
anybody know if there is a difference in spindels on 94-95 models to say 99-03.i heard that the 99 and on bring the wheels out,but i dont know.
--------------------
06 magnum srt8 6.1
05 f250 lifted
94 gt wait till you see me!
Posts: 1468 | From: hate`n in richmond | Registered: Apr 2004
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
I'm not sure...I'd be interested in knowing too...
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
Well the sn95 spindles are all the same for 94 and 95 be it from a V6, GT or cobra. The '96+ newer units will work, but the track will increase 8mm per side.
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
Some additional info for Fox conversions
0.330" tall spacer, 5/8" inside diameter , 1.5" outside diameter (or a stack of washers totaling 0.330"). This is needed to properly fasten the crown nut on the lower control arm ball joint (the fox ball joint is about 1/2 taller than the SN95s and you will run out of threads). If you are buying new tubular A arms, get them with the SN95 ball joints
--------------------
R.I.P. Charlie Bruno Dec 2001
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
