66 InjectedCobra
¯
Member # 819
|
posted
I have an Aeromotive street rail kit thanks to 1slowLX..AKA Albert. I was alil conserned about the way they tell you to plumb the lines. There is a block that feeds the front of the passenger side rail and the back of the drivers side rail. The regulator screws into the back of the passenger side rail letting fuel return through the passenger side "ONLY"! The fuel will always be moving through the passenger side rail at low RPM's, but the drivers side will only get pressure and never see flow. The only flow it will see is the fuel the injectors move and the rail is 1/2 inch so that = alot of fuel just sitting around getting warm for when I do punch it. NOT GOOD! Has anyone found this to be a problem or even noticed what the hell I am talking about? HELP THANKS..Mike ![[Frown]](frown.gif)
-------------------- Just An Old Slow Ford!
http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=6389544
Posts: 2857 | From: bay area | Registered: Jan 2002
| :
|