Thinking about it as my next mod .

I'm lookig for more midrange and believe I've found the formula:

211 deg. .500 lift- intake
217 deg. .550 lift- exhaust
114 deg. lobe sep.

TRY2PAZ you out there???

[ March 06, 2002: Message edited by: yesIdid ]

SHM=$$$$$$$$$-right????

SHM "Billet" GT cams:
230 deg @ .490 thruout= somewhat of a lope @ idle and ~20 rwhp on a stock 99-up GT. Right now they're $595.00 (gulp) down from $800.00 (double-fucking gulp). I don't know about those prices ; but u can't deny the hp improvement!!!!

As far as the install, they go in straight-up! Int/exh. are on the same stick so no degreeing is necessary. Basically I'd do it myself...

I got the profile figures from Dave Maxwell @ Crane.

I'm still waiting on my chip, so the cams may be a few weeks away (maybe longer )

I think the $4000 price tag applies to the Stage 3 kit; heads, Bullit intake, cams, valve springs, etc. I'm only taling about the cams . BTW, a valve spring upgrade isn't necessary; no floating danger .

I'm definitely down 4 a group purchase!!!!!!!!!

[ March 06, 2002: Message edited by: yesIdid ]

quote:

---

Originally posted by TRY2PAZ:
So how much are we talking for just the cams? Ask Dave if you can be the protoytpe car. Then maybe you can get it for free. Are you coming on the 30TH?
Let me know when you get them. I want to help you put them in.

---

If I go Crane, the cams will run a lil over $300.
These cams have been on the market for months now, according to Dave, in lots of stangs- no complaints... Pencil me in for the 30th . I'll take any help I can get .

The only good thing about the Sean Hyland stuff is I can keep my stock cams, which I prefer to do. I was told by Dave (Crane) they may be getting cores, but til this point they haven't been able to quote,"procure them."

[ March 06, 2002: Message edited by: yesIdid ]

quote:

---

Originally posted by 2000bluestalker:
im also in for a group perchase. where did you find the crane cams. i checked there website and couldn't find anything. 300 for a set of cams doesn't seem too bad.

---

$300 is 4 a regrind . For more info contact Dave Maxwell @ Crane.

Have to take a stab at you guys, a little nitrous seems like such an easier way to get the horsepower and you get something the 4.6 lacks too !!

quote:

---

Originally posted by PunkINa5.SLOW:
hhehee

Have to take a stab at you guys, a little nitrous seems like such an easier way to get the horsepower and you get something the 4.6 lacks too !!

torque

---

My goal, don't ph***in laugh it has been achieved, is to build a n/a 300 rwhp 2v stang. A/market cams are a small element in my plan

The price for the stock cams ($130) plus the regrind is getting dangerously close to the SHM price. With the Canadian units you won't have to wait!!! Place your order, 1 week later they're at your house. No shipping of cores, grinding, none of that shit.

quote:

---

Originally posted by 2000BlackGT:
ok, you guys are getting my mouth watering on this. TRY2PAZ has nearrly talked me into this. Let me know how its going. Thanks TRY2PAZ for helping my spend all of my hard earned money on my car instead of chicks

---

quote:

---

Originally posted by TRY2PAZ:

1st of all- You get $ FORM YOU MOMMEY
and 2nd of all, why do you spend $ on PAMELA? Do you get peticures for your hand?

---