Author
|
Topic: still having a hard time with my fuel system
|
86 T TOPS
¯
Member # 8855
|
posted
hey folks I'm still having an issue getting my pump to prime . I haved replaced the fp relay ecc relay and still no power to the pump, there are only two wires gettin power out the fp tree , the orange/blue witch goes to starter relay and red/black wire that goes to ecc both has power the pink/black witch powers the fp doesn't for got to mention that the inertia switch does have power ive done some research but have really gotten no where . HELP !!!!!
-------------------- TTOPNGT
Posts: 704 | From: redwood city | Registered: Jan 2009
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
You need to measure voltage starting from the solenoid, computer, relay, interia switch , then pump, I have had bad grounds and fusible links cause fuel pump problems, check ground the ground next to the battery first.
-------------------- 88 Saleen #564 88 GT 331 NOVI2000 88 Coupe TURBO 9.75@142 95 Cobra R #75-SOLD 06 F250 13 BMW AH3 17 GT350 #5556 GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
ive seen a few problems with the harness between the relay and switch where very little voltage gets to the pump try bypassing it from the relay
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
86 T TOPS
¯
Member # 8855
|
posted
ECM,FP RELAY,INERTIA SWITCH ALSO HAS POWER . THE PINK/BLACK WIRE FROM THE FP RELAY THAT FEEDS POWER TO THE PUMP DOESNT HAVE ANY VOLTAGE !
-------------------- TTOPNGT
Posts: 704 | From: redwood city | Registered: Jan 2009
| :
|
|
93lx4cyl
¯
Member # 10517
|
posted
Pick up coil?
Posts: 204 | From: Sacramento | Registered: Dec 2010
| :
|
|