Author
|
Topic: Tranny jerk
|
S550_Andres
¯
Member # 11083
|
posted
So I was come home from work and I noticed it jerked when I'd let off the gas in 5th gear. Any idea of what it might be. It happens on my 01 gt
I'm also replacing the
Clutch Pilot bearing Throw out bearing Flywheel U joints And upgrading my crossmember [ November 28, 2012, 01:31 AM: Message edited by: Unclaimed_Stangz ]
-------------------- 86 notch coyote swapped 89 convertible 302 hci 85 notch 347 hci
Posts: 2747 | From: 650-408 | Registered: Jul 2011
| :
|
|
Stangn5oh
¯
Member # 10875
|
posted
First climb under and check your bolts for the driveshaft,then inspect the u joints. Mostlikely ujoints the problem.
Also does your shifter stick wobble while in idle,check mounts Or balancer is off balance and caused your bolts to wiggle a little loose then breaking the u joints. Sounds overboard but happened to me
-------------------- 88 lx 17 Renegade turbo 18 Compass 4x4
Hit the gasser, go faster, all u heard was dual exhaust n flowmasters.
Posts: 1643 | From: Sacramento | Registered: Apr 2011
| :
|
|
dean-93
¯
Member # 9401
|
posted
quote: Originally posted by Stangn5oh: First climb under and check your bolts for the driveshaft,then inspect the u joints. Mostlikely ujoints the problem.
Also does your shifter stick wobble while in idle,check mounts Or balancer is off balance and caused your bolts to wiggle a little loose then breaking the u joints. Sounds overboard but happened to me
+1 my drive shaft bolts loosened twice before i put lock tight on them
-------------------- 93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote: Originally posted by dean-93: quote: Originally posted by Stangn5oh: First climb under and check your bolts for the driveshaft,then inspect the u joints. Mostlikely ujoints the problem.
Also does your shifter stick wobble while in idle,check mounts Or balancer is off balance and caused your bolts to wiggle a little loose then breaking the u joints. Sounds overboard but happened to me
+1 my drive shaft bolts loosened twice before i put lock tight on them
Lol you're lucky you didn't find a driveshaft through your floor.
-------------------- -Savage Habits- 1992 Summer Edition 1986 Hatch- catfish killer 1964 Impala hard top
Posts: 18535 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
S550_Andres
¯
Member # 11083
|
posted
I just did my clutch and I didn't put lock tight but probably will in a day or two an te jerking seems more of air that's not going through or something Right now I'm getting p0171 and p0174 codes. Talked to a guy and said a I have a air leak some were just can't figure out where maybe the maf sensor
-------------------- 86 notch coyote swapped 89 convertible 302 hci 85 notch 347 hci
Posts: 2747 | From: 650-408 | Registered: Jul 2011
| :
|
|