Author
|
Topic: What set up do u recomend on a 306 block I want to stroke it and what heads to go wit
|
87 coupe
¯
Member # 10919
|
posted
I have a gt40 tubular intake manifold 70 mm tb and spacer 24lb imjectors and a new e303 cam i want stroker and what heads to go with any advice I'm not looking for anything super super fast
Posts: 2016 | From: Home | Registered: May 2011
| :
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
With that cam and intake and increasing the motor to either 331 or 347,and assuming your not trying to set low ET of the universe.Id say go with something like AFR 165's or 185's or any other aftermarket heads with an intake runner of around 165-190cc's.And if your really not into mesing with rockers get something that has factory style bolt down rockers too.
-------------------- "Im not stupid,i just act that way so i dont make you dummies uncomfortable."
"Old age and treachery shall overcome youth and skill."
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
90 7up lx
¯
Member # 10304
|
posted
Go w a 96 gt
Posts: 1266 | From: north valley | Registered: Sep 2010
| :
|
|
87 coupe
¯
Member # 10919
|
posted
I actually hVe 1.6 rockers already and thanks for the advise dnt know much about matching stuff
Posts: 2016 | From: Home | Registered: May 2011
| :
|
|
87 coupe
¯
Member # 10919
|
posted
I'll take your car of your hands also and work out something with a paint job force the Lx 7 up
Posts: 2016 | From: Home | Registered: May 2011
| :
|
|