tlcluver21
¯
Member # 9062
|
posted
 
 
Ok I am running into some problems I got a 331 block 10.5 to 1 compression with afr 185 heads and trick flow track heat intake. This is in a 94 mustang. Here is what I am looking at and can't decide what the best route would be.
Looking at long tubes and off road x
A quarter horse so I can actually tune this car and get it running some what good
Or get the bigger 80mm pro m into a Anderson motor sports n/a power pipe into a bigger tb and possibly looking at getting a bigger r series intake to allow for a bigger style tb.
I am going to do one of these and no all will benefit but not sure which one will be most beneficial any help would be awesome. I had contiplated tearing the motor up and getting ed to help me out and set me up a custom cam but I do that well its going to entail me pulling the motor and doing a few more things such as sending heads and getting them ported and matched up to my intake better so again not against any ideas but this is what I am looking into.
Posts: 335 | From: redding | Registered: Mar 2009
| :
|
Email this post to someone!
Printer friendly view of this Ford topic
