Author
|
Topic: polishing metal
|
Secnd2nun64
¯
Member # 1431
|
posted
So I got a new bench top buffer to buff out the aluminum parts like the valve cover and blower parts going on the new engine. I used the ryobi yellow compound which is for cleaning and polishing brass and a "green stick compound" that I got at a goodguys show a few years back which gives a little finer finish than the yellow. So now the metal has a nice shine but has fine scratches you can see when you hold the parts at an angle. What's the next compound I should use? I was thinking white rouge. What do you all use?
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
70mach351
¯
Member # 7528
|
posted
jewlers rouge, think its red, i polished an axe once with it worked great.
-------------------- 70 Mach 1 gettin a make over 2001 Ford F250 Crew Cab 7.3
Posts: 1762 | From: EDH | Registered: Mar 2007
| :
|
|
ALMOST STOCK
¯
Member # 10085
|
posted
White Rouge is next.
Posts: 94 | From: Cameron Park, Calif | Registered: Jun 2010
| :
|
|
93 twintrbo
¯
Member # 10475
|
posted
Use The brown to cut the material down and white to finish. Works every time.
Posts: 42 | From: Nor Cal | Registered: Nov 2010
| :
|
|
phildog
¯
Member # 1214
|
posted
I bought a nice polishing setup years ago and did a lot of polishing and a lot of 'learning.' I found for the time it takes and the mess it creates, I feel that it is well worth what I pay a polishing shop to save myself the frustration and get better results as well. I'll tackle small parts but the large pieces I happily pay someone else. IMHO.
Posts: 1554 | From: 510 | Registered: Apr 2002
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
Thanks for the info. I'll try the white out. The also had one for polishing plastic so I may get that one too along with some additional buffing wheels.
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|