Author
|
Topic: rolling fenders
|
Sydewayz_Stan
¯
Member # 10217
|
posted
Starting this thread because i want to roll all 4 of my fenders on the notch. Just wanted advice or tips on how to do it without screwing something up and what tools that i'll need. Thanks cafords
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
5.0 with some go
¯
Member # 8248
|
posted
when i rolled mine I used the eastwood went nice and slow and used a heat gun to heat up the paint...don't go too quickly that is where you run into problems it took me about a hour or so each fender to get it where i wanted it with no waves the more pressure the roller puts on the fender the more likely you are to get waves so go nice and slow. the eastwood will give you a workout but its not that bad I only have a 95 gt so i don't know how much different the fenders are just make sure you only roll down to the rivets that hold the inner and outer fender together on the bottom front part of the fender u can see them if u look closely its almost impossible to to roll this part of the fender due to the rivets and usually u don't have to roll the lip all the way flat just enough angle so it doesn't rub or tear up the tires. just my 2 cents
Posts: 247 | From: walnut creek ,ca | Registered: Feb 2008
| :
|
|
fredfifty
Since 9/2010
Member # 10320
|
posted
i was thinkin about rollin mine too, but whats an eastwood...?and how bout just takin a die grinder to the inner lip of the fender..does that work too? ah dunno..
-------------------- RIP EDSON VELORO IM A NOOB, EXCUSE ME. THANKS. 92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL 62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|
Stimpys 5.0
¯
Member # 5829
|
posted
I have done a few, I can roll them for you. Or u can rent the tools n ill watch u do it. I live near natomas, sac. Lmk.
I can do it for $50 bucks, front or rear. Or $85 all 4 corners
Rent Da tool for 40 bucks(have to roll them here, sac) otherwise I need a 450 deposit
-------------------- 1989 burgundy coupe 1968 mustang 289 - 4 speed 1989 white lx (totalled)
Posts: 646 | From: sac/916 | Registered: Jul 2005
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
There's people on craigslist that rent the tool out or will do it for you. Here's one ad I found.
http://sacramento.craigslist.org/pts/1969596724.html
I would like to get the rears done on mine. If you get enough people that want to get it done, maybe we can all chip in on the rental and get together somewhere. [ September 24, 2010, 03:22 PM: Message edited by: Secnd2nun64 ]
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
quote: Originally posted by Secnd2nun64: There's people on craigslist that rent the tool out or will do it for you. Here's one ad I found.
http://sacramento.craigslist.org/pts/1969596724.html
I would like to get the rears done on mine. If you get enough people that want to get it done, maybe we can all chip in on the rental and get together somewhere.
Im down lets get more people it looks like a pretty straight-forward process just dont want to spend a lot on renting the tool
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|