|
Author
|
Topic: removing t5 out of car
|
trickflow211
¯
Member # 8503
|
posted
 
 
hey i am going to be removing a t-5 transmission out of a 87 5.0 mustang tomorrow so i can get the transmission rebuilt, what would be the easyiest way to remove this transmission from the car?. your help would be greatly appreciated! thanks!.
--------------------
1990 Cobra Clone 421 Tq 420 Hp
Need General Contractor Services? 925-338-5422 serving East Bay Area over 20yrs
Posts: 2449 | From: Pittsburg/Sacramento | Registered: Jul 2008
| :
|
|
MikeD.
¯
Member # 8060
|
posted
1 bolt at a time.
--------------------
1999 FRC Vette
12.77 @ 110
Posts: 2854 | From: Vacaville Ca, 707 | Registered: Nov 2007
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
its fairly simple..unbolt the exhaust,unbolt the crossmember and clutch cable,then unbolt the tranny from the bellhousing..should come right out..and you might as well replace the clutch while you in there
--------------------
1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
turbo50
¯
Member # 6700
|
posted
You are in concord? I will remove it and install it for you for $160
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|
trickflow211
¯
Member # 8503
|
posted
thanks guys, and i am going to get it rebuilt, and then put it into my 90 AOD. =] hopefully it stops sprinkling so i can get outside and do it!
--------------------
1990 Cobra Clone 421 Tq 420 Hp
Need General Contractor Services? 925-338-5422 serving East Bay Area over 20yrs
Posts: 2449 | From: Pittsburg/Sacramento | Registered: Jul 2008
| :
|
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
Yeah probably best just to remove the trans from the bellhousing. Much easier process if you don't need to mess with the clutch
--------------------
Signature Wheel Ford Representative
Email: Terrance@Signaturewheel.com
Instagram: @Signature_Wheel_Mustang
Web: www.SignatureWheel.com
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
FordRyderz510
¯
Member # 6771
|
posted
quote:
Originally posted by Duncan Motors:
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
+1
That is way cheap for tranny work
--------------------
Ford Ryderz -Est. 2003
88' GT
96' GT
97' Saleen #17
94' GT-Sold
Posts: 1894 | From: Hayward | Registered: May 2006
| :
|
|
rollin5ive0
¯
Member # 8592
|
posted
quote:
Originally posted by Sic Beast:
quote:
Originally posted by Duncan Motors:
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
+1
That is way cheap for tranny work
cheap work comes along with a cheap job i always say!! naw turbo50 is a good mechanic go with him....shit i usually pull my own trannys but for 160 i might have him do it!! ![[patriot]](graemlins/patriot.gif)
--------------------
875.0gt
90dtlx5.0
93blkvenumos5.0COBRA#3377
96redthundr4.6l4vCOBRA
964.6l2vGT
895.0lGT
93cleancorlgreen5.0GT
93meancoralgreen5.0GT
Posts: 1830 | From: 707 vacaville ca | Registered: Aug 2008
| :
|
|
drop88stang
¯
Member # 9650
|
posted
Yeah thats cheap I might need you to do mine in a few weeks how long would it take to get it finished?
Posts: 167 | From: Sacramento | Registered: Dec 2009
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
