|
Author
|
Topic: How to remove AIR METER
|
Stangenthusiast77
¯
Member # 6307
|
posted
 
 
Went to Sears to try to find the tool, but they don't carry it. Anybody have a picture of it?
--------------------
Currently wanting to trade my aero-nose stang for a Four-eyed. Rolling car for Rolling car.
Posts: 68 | From: Los Angeles County | Registered: Dec 2005
| :
|
|
S351-R
CAFords OG
Member # 1605
|
posted
If you are talking about the two screws that hold the sensor to the housing, it's a T-20 tamper resistant torx. Lisle part# 26030 is a torx bit you could use if you have a nut driver or a 1/4 inch wrench.
Posts: 344 | From: Earth | Registered: Jul 2002
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
sears should have a set with the bits you need.
i bought mine there. it is about $30 bucks.
--------------------
WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143
77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
Curt
¯
Member # 6254
|
posted
Radio shack has them too
--------------------
'90 GT
'94 Toyota 4wd "It have problem"
'56 F100 5.8 AFR185's Vortech SC S-trim
Posts: 866 | From: Monterey/Rocklin | Registered: Nov 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
