Author
|
Topic: 2003 Cobra--NEED HELP EXHAUST SCRAPING
|
Beasty5.0
¯
Member # 2935
|
posted
Recently I had a SLP X-pipe and SLP catback installed by my friends and the darn thing scrapes on almost everything that has a bump. We have tried adjusting it several times, but nothing helps, so I was wondering if anyone had any suggestions as to what I can do or if anyone has a hookup at an exhaust shop to see if maybe an additional hanger can be added somewhere.
-------------------- 1992 Geo Metro, Running 32's in the quarter-mile
Posts: 1055 | From: San Francisco | Registered: Jun 2003
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
Is your snake lowered at all?
Good luck getting more clearance
Is it the X or the muffs or pipes hitting.
I had the same prob with the 5 piece Bassani X hanging low.
I switched to a upr x and that was much tighter to the underbody of the car but the MAC 3" still scrapes from time to time.
edit: DOn't know if adding another hanger will work if only .5-1"
Also don't think you wana go welding stuff onto the CB or X if you wana sell later.....same as hacking up the X pipe.
When i did add the cats to the upr pipe i had my buddy weld mine even closer to the body to gain a few more cm's of space [ April 13, 2007, 06:31 PM: Message edited by: TRIXSNK ]
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
Beasty5.0
¯
Member # 2935
|
posted
The car is stock height. It's scraping on the exhaust flange that connects the x pipe and the catback together. I was wondering if maybe I can find different exhaust flanges because the one's that come with it are big.
Posts: 1055 | From: San Francisco | Registered: Jun 2003
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
Don't know how SLP's flanges are but can you rotate them so that the part of the flange where the bolts go through don't aim down.
I hope that makes some sense but that's how teh flanges are on the CB i have......i rotate them to gain as much clearance as possible....but i still catch them once in a while
Also is the X pipe the modular style?
If so i'd look into the way you angle each piece and keep everything loose and slowly tighten and re-check and tighten and re-check etc. [ April 13, 2007, 06:40 PM: Message edited by: TRIXSNK ]
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
Just take it to an exhaust shop and ask them to re-tighten everything. I was having a problem with low hanging X for a lil bit, took into a shop and they pushed up and tightend, all good now!
-------------------- 2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
91Trunkster
¯
Member # 6598
|
posted
Your best bet is a muffler shop, bolt on stuff almost always never just bolts on just perfectly.
-------------------- Yellow94GT never touched anyone's sig or banned anyone, so I'm going to quit spreading that rumor. It's not like I have any proof anyways. All yellow94gt and other mods have done is volunteer their time to help other people buy/sell parts, learn how to make their cars go faster and meet fellow enthusiasts. I'm a hater, but it's hard to hate on these facts. I have saved hunrdeds, maybe thousands of dollars here buying and selling parts over the years alone, but I don't care, this website owes me damnit, and I'll piss on it as much as I want. Us haters gonna hate. Why contribute to something when you can take for free? I act like I'm@Age15 I make friends on the internet that are@Age18 I was picked on in my youth so I became a bully@Age24 My mouth started to run 24/7 on the internet, but my car never at the track@Age26 First pubic hair@Age30 Troll@Age31 My internet friends and I ALL just got the boot for good!@Age31 Yes, you read it right, 31 and just as childish as my fresh out of highschool internet friends@31 Oh yeah, this isn't my website, so no one has to ask for my permission to change my sig. Hell, not like I pay the CAFORDS bill, so why should they need my permission to put what they want on their site? We're all guests here. Maybe some of us should start acting like guests or leave? (510)375-1589
Posts: 1648 | Registered: Mar 2006
| :
|
|
Hyperider
¯
Member # 5936
|
posted
I have the same problem, my Bassani x-pipes w/ cats also scrapes on almost all bumps. Unless I really go over slow it will almost always scrape. I brought it back to the people that installed it and they can't do anything. I might try a muffler shop next. My cobra is not even lowered.
-------------------- 04 Cobra
Posts: 396 | From: East Bay | Registered: Aug 2005
| :
|
|
91Trunkster
¯
Member # 6598
|
posted
Bolt on exhaust always needs adjustement, I've done quite a few and have never not went to a muffler shop to finish it. [ April 15, 2007, 02:47 PM: Message edited by: 91Trunkster ]
-------------------- Yellow94GT never touched anyone's sig or banned anyone, so I'm going to quit spreading that rumor. It's not like I have any proof anyways. All yellow94gt and other mods have done is volunteer their time to help other people buy/sell parts, learn how to make their cars go faster and meet fellow enthusiasts. I'm a hater, but it's hard to hate on these facts. I have saved hunrdeds, maybe thousands of dollars here buying and selling parts over the years alone, but I don't care, this website owes me damnit, and I'll piss on it as much as I want. Us haters gonna hate. Why contribute to something when you can take for free? I act like I'm@Age15 I make friends on the internet that are@Age18 I was picked on in my youth so I became a bully@Age24 My mouth started to run 24/7 on the internet, but my car never at the track@Age26 First pubic hair@Age30 Troll@Age31 My internet friends and I ALL just got the boot for good!@Age31 Yes, you read it right, 31 and just as childish as my fresh out of highschool internet friends@31 Oh yeah, this isn't my website, so no one has to ask for my permission to change my sig. Hell, not like I pay the CAFORDS bill, so why should they need my permission to put what they want on their site? We're all guests here. Maybe some of us should start acting like guests or leave? (510)375-1589
Posts: 1648 | Registered: Mar 2006
| :
|
|
|