Author
|
Topic: need brake help
|
89TRUNK
¯
Member # 2506
|
posted
I recently did a disc brake conversion on my 66 falcon and now my brakes suck...pedal goes all the way down and the car barely stops.. the system doesnt have any air in it, i bled the brakes 3-4 times. The brakes can't hold the car if i step on the brakes and gas... I have no clue what it could be.. the conversion is from a 70 mustang with everything from the donor car (manual disc setup)
Posts: 1843 | From: Bay Area | Registered: Feb 2003
| :
|
|
88DroptopGT
¯
Member # 2535
|
posted
Did you also take the Master cylinder from the same setup? If so did you bleed the master cylinder also when you took it out of the donor vehicle?
http://www.misterfixit.com/brakbld1.htm
So you have drums in the rear still as well, correct?
Posts: 3978 | From: 707 | Registered: Mar 2003
| :
|
|
Joooestang66
¯
Member # 2828
|
posted
You still have the single master cylinder or a dual resivour?
-------------------- "Don't Drive Faster Than your Guardian Angel Can Fly..... Well My Guardian Angel Can Fly Pretty Fuc*ing Fast!!!"
Posts: 581 | From: Elk Grove | Registered: May 2003
| :
|
|
89TRUNK
¯
Member # 2506
|
posted
I replaced the master with the one on the car (dual res.)
Posts: 1843 | From: Bay Area | Registered: Feb 2003
| :
|
|
89TRUNK
¯
Member # 2506
|
posted
I did not bleed the master, a buddy of mine said he has never bled a master and nas never had any issues with his brakes(he's been working on fords for 20+ years)
Posts: 1843 | From: Bay Area | Registered: Feb 2003
| :
|
|