Author
|
Topic: 03 COBRA Blower swap help asap!!!
|
sharkattack
¯
Member # 645
|
posted
I got the blower off and everything went smooth, Swapping the IC to the ported blower now. I took the IC off no sweat but there is not gasket there. Is there supposed to be a gasket? Looks like there may have been some silicone at one point but it is only at one corner. Do I need to use some silicone and if so what kind??? Black RTV???
Respnonse needed asap please!!!
-------------------- 1965 Fastback
03 Cobra with some stuff
Posts: 935 | From: Oakley Ca | Registered: Dec 2001
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Are you referring to the Intercooler cap? (held on by 3 each 10mm bolts, one 8mm?) If so, no. There is no gasket or silicone.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
94gt
¯
Member # 3060
|
posted
from what ive seen, there is only a gasket that goes on the mating surfaces for the blower and lower intakes, since the intercooler nestels inside of the lower.
-------------------- 2020 Explorer ST 2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
sharkattack
¯
Member # 645
|
posted
quote: Originally posted by JohnB: Are you referring to the Intercooler cap? (held on by 3 each 10mm bolts, one 8mm?) If so, no. There is no gasket or silicone.
No, the actual I/C. Not the cap. There was a paper gasket for the cap which I reused. I ended up using black RTV for the I/C which bolts undernieth the blower.
-------------------- 1965 Fastback
03 Cobra with some stuff
Posts: 935 | From: Oakley Ca | Registered: Dec 2001
| :
|
|