Author
|
Topic: which cam and the right pushrods?
|
maeco
¯
Member # 2578
|
posted
okay i got the top end all taken apart.iam about to install the tfs heads and 1.7 rr but now iam thinking i should throw some cams in there.can anybody recomend the right cam for my set up. stock bottom end tfs twisted wedge,1.7 tfs rr,a/c delete,somg delete,vortech s trim (stock pullies), o/r h-pipe,bbk headers.also does anybody know which length of pushrods i would need.or will i have to use that tool to measure the lenght of push rods?
-------------------- Looking for clean white mustang email me
Posts: 2408 | From: bay area | Registered: Mar 2003
| :
|
|
GOT 50
¯
Member # 1960
|
posted
my crane 2031 cam. would be perfect with your 1.7's
Posts: 2139 | From: SF/DALY CITY/MILLBRAE | Registered: Oct 2002
| :
|
|
maeco
¯
Member # 2578
|
posted
what pushrods are you using?
-------------------- Looking for clean white mustang email me
Posts: 2408 | From: bay area | Registered: Mar 2003
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
i think u have to buy T/F pushrods when u r using their heads
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
92stangLX
¯
Member # 3252
|
posted
quote: Originally posted by maeco: what pushrods are you using?
I would recommend measuring before buying the pushrods just to make sure you get the right ones.
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
maeco
¯
Member # 2578
|
posted
what tools do i need and is it hard to do?never did that before.
-------------------- Looking for clean white mustang email me
Posts: 2408 | From: bay area | Registered: Mar 2003
| :
|
|
Eagle347
¯
Member # 6205
|
posted
quote: Originally posted by maeco: okay i got the top end all taken apart.iam about to install the tfs heads and 1.7 rr but now iam thinking i should throw some cams in there.can anybody recomend the right cam for my set up. stock bottom end tfs twisted wedge,1.7 tfs rr,a/c delete,somg delete,vortech s trim (stock pullies), o/r h-pipe,bbk headers.also does anybody know which length of pushrods i would need.or will i have to use that tool to measure the lenght of push rods?
I have a crane powermax cam (498 lift), the right push rods, and valve springs all forsale cheap. I bought them because I was going to just do my top end, with stock bottom end, but now im doing a stroker motor, and im using a bigger cam.
-------------------- 1995 Mustang GTS 1 of 1002 deep forest green GTS's made. Bone stock.
1990 Coupe 347 NX E85 Nitrous kit
Posts: 712 | From: Dayton, OH | Registered: Nov 2005
| :
|
|