Quick 88LX
¯
Member # 1950
|
posted
What kind of regulator do you have and do you have a gauge to see what the pressure is at? The way you adjust the fuel pressure is:
-Turn on your car -Disconnect the regulators vacuum line -Loosen the nut on the thread at the top of the regulator -Using an Allen head wrench, turn the threaded fitting clockwise for more pressure and opposite for less pressure. -Tighten down the locking nut -Re-connect the vacuum line -Go drive around and see if the car feels better than before.
Without a gauge it is going to be very hard to determine exactly what PSI you are running at. But the "driving around" method always seems to work too [ November 06, 2004, 09:39 PM: Message edited by: Quick 88LX ]
-------------------- "Men are Made, Not Born" Car Picture : http://www.angelfire.com/theforce/quick88lx/ Original Member #495. Can I get my number back?
Posts: 1785 | From: Fairfield, CA/Okinawa, Japan | Registered: Oct 2002
| :
|