|
Author
|
Topic: nos question
|
sac 5.0
¯
Member # 2980
|
posted
 
 
putting a wet kit in but what plugs should i use how much colder then stock and what brand. also i will be using like a 175 shot what should my timming be set at.thanks in advancejoe
Posts: 1021 | From: sac | Registered: Jun 2003
| :
|
|
JoeT
¯
Member # 298
|
posted
what heads?
175 generally speaking is two ranges colder, so say instead of autolite 25's, run 23's, and pull about 2 degrees per 50 HP, so say instead of 14 BTDC, run about 7.
*waits for the chevy guy to talk about irrelevant knock sensor tech*
--------------------
1984 Ford Tempo AOD--- RIP
Posts: 6785 | From: San Jose | Registered: Jun 2001
| :
|
|
sac 5.0
¯
Member # 2980
|
posted
my heads are stock along with stock bottom end.i have intake cold air 1.7 rockers 373 gears drive line and run 13.1 with a 1.4 60 ft with mh street drags
Posts: 1021 | From: sac | Registered: Jun 2003
| :
|
|
MINGRYGT
¯
Member # 2439
|
posted
quote:
Originally posted by shade-tree:
what heads?
175 generally speaking is two ranges colder, so say instead of autolite 25's, run 23's, and pull about 2 degrees per 50 HP, so say instead of 14 BTDC, run about 7.
*waits for the chevy guy to talk about irrelevant knock sensor tech*
that about sums it up.. but make sure you use COPPER plugs if your not already.. nitrous does not like platinum.
--------------------
R.I.P. MIKE STARKEY 5-17-03
Posts: 488 | From: Concord | Registered: Feb 2003
| :
|
|
JoeT
¯
Member # 298
|
posted
quote:
Originally posted by sac 5.0:
drive line and run 13.1 with a 1.4 60 ft with mh street drags
1.4 60' ![[worship]](graemlins/worship.gif)
--------------------
1984 Ford Tempo AOD--- RIP
Posts: 6785 | From: San Jose | Registered: Jun 2001
| :
|
|
91 5.0
¯
Member # 1527
|
posted
quote:
Originally posted by sac 5.0:
with a 1.4 60 ft with mh street drags
![[Eek!]](eek.gif)
--------------------
02 GT - Zinc Yellow
91 5.0 LX - Red
Posts: 1316 | From: Fairfield | Registered: Jul 2002
| :
|
|
Gear Head
JARED
Member # 779
|
posted
On stock axles?
--------------------
Support our troops!
Posts: 5685 | From: EASTBAY | Registered: Jan 2002
| :
|
|
sac 5.0
¯
Member # 2980
|
posted
yes 28 spline axles with 373 but a shit load of suspension panhard bar torque arm and all the interior was gutted and i welded up all the seams in the whole car.yes took all the glue off and noise deadner.then put it all back together.but worth it with that 1.40 60ft
Posts: 1021 | From: sac | Registered: Jun 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
