|
Author
|
Topic: Any one port match their Throttle body??
|
RioredGT
¯
Member # 2300
|
posted
 
 
If you did it yourself, how hard was it? I can't decide between a 75mm or 70, but I know to get the full benefit of the 75mm you need to port matchit. It's a for 98gt with p&p svo heads.
Posts: 410 | From: Bay Area | Registered: Jan 2003
| :
|
|
91GR40LX
¯
Member # 1329
|
posted
What intake are you trying to port match? What tools do you have access to(die grinder, dremel)? It's actually pretty simple. Outline the intake with the new gasket with a sharpie. Slowly work the intake around untill sharpie marks are gone. Make sure you make a smooth transition for the air to flow and that there are no obstructions once you bolt the TB to the intake and no debris has gone down the intake(next stop...your engine).
Posts: 340 | From: East Bay | Registered: May 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
