|
Author
|
Topic: 99 Cobra clutch??
|
j_yates78
¯
Member # 1791
|
posted
 
 
How can you be sure your clutch is going out?
if i am right i think i will have to replace my clutch soon.
what is a good clutch to go with? i have heard mixed responses with king cobra.
Bill at Apex recommended a Kevlar unit that he carries.
all help will be appriciated.
thanks.
--------------------
99 Cobra HCI/Vortech
Koni Yellows
Griggs Subs
Eibach Springs
MM C/C plates
4.10's
Posts: 148 | From: Santa Clara | Registered: Sep 2002
| :
|
|
2000BlackGT
Loyalty
Member # 283
|
posted
spec stage 2 ![[patriot]](graemlins/patriot.gif)
how much is bill's clutch?
Posts: 2833 | From: Chico, CA | Registered: Jun 2001
| :
|
|
j_yates78
¯
Member # 1791
|
posted
Apex wanted $400-450 i forgot the exact amount. It was $400 something for install too. $900 or so for both. is that high or about where it should be? I have never had a clutch put in and i don't know how difficult it is on my car.
--------------------
99 Cobra HCI/Vortech
Koni Yellows
Griggs Subs
Eibach Springs
MM C/C plates
4.10's
Posts: 148 | From: Santa Clara | Registered: Sep 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
Thats high!!!
I could put the clutch in for you for half that and I'm sure other members of cafords could too.
$400. for just a clutch is way too expensive..Get a SPEC stage 2 off Chuck(2000BlackGT)Dont forget that your '99 cobra clutch is 11." and any 4.6 from 96-98 is 10.5"..
Can you still chirp the tires or does the clutch just slip when you shift hard? ![[burnout]](graemlins/burnout.gif)
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
j_yates78
¯
Member # 1791
|
posted
the problem i am having now is that i can feel a vibration in the pedal, i will have to pay more attention. what exactly should i look for?
--------------------
99 Cobra HCI/Vortech
Koni Yellows
Griggs Subs
Eibach Springs
MM C/C plates
4.10's
Posts: 148 | From: Santa Clara | Registered: Sep 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
quote:
Originally posted by j_yates78:
the problem i am having now is that i can feel a vibration in the pedal, i will have to pay more attention. what exactly should i look for?
...If your clutch chatters (the vibation you feel) when you engage it(releasing the pedal)you probably created "hot spots" on the flywheel(caused sometimes by driving the car too hard)..It makes the flywheel not smooth and it creates a chatter...A little chatter doesnt hurt a long as its not slipping..
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
j_yates78
¯
Member # 1791
|
posted
alright, thanks for the help. How many miles do you think i will be able to get out of the stock clutch?
--------------------
99 Cobra HCI/Vortech
Koni Yellows
Griggs Subs
Eibach Springs
MM C/C plates
4.10's
Posts: 148 | From: Santa Clara | Registered: Sep 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
quote:
Originally posted by j_yates78:
alright, thanks for the help. How many miles do you think i will be able to get out of the stock clutch?
....
...It depends on how you drive it...Stock clutch is already out on try2paz's Saleen it only has around 18,000 miles...Most clutches should last at least 3years/30,000 miles..But like I said it all depends on how you drive your car...
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
j_yates78
¯
Member # 1791
|
posted
I just hit 63K on the car yesterday. so i think i will start searching for a clutch and then just find somewhere to put it in when it goes or gets worse. Am i going to run ito trouble by leaving the clutch in there too long, do i have a risk of breaking anything?
--------------------
99 Cobra HCI/Vortech
Koni Yellows
Griggs Subs
Eibach Springs
MM C/C plates
4.10's
Posts: 148 | From: Santa Clara | Registered: Sep 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
The worst that could happen is you MIGHT have to buy a new flwheel(you will have to resurface the flywheel when you install a new clutch anyway)...Take your time with your shifts(dont power shift)that way your transmission will be ok.....
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
j_yates78
¯
Member # 1791
|
posted
cool, thanks.
--------------------
99 Cobra HCI/Vortech
Koni Yellows
Griggs Subs
Eibach Springs
MM C/C plates
4.10's
Posts: 148 | From: Santa Clara | Registered: Sep 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
