|
Author
|
Topic: milky sluge oil under pvc valve and valve covers
|
street_illegal_stang
¯
Member # 1554
|
posted
 
 
coming up from the push rods???
i took off the intake a few months ago..Gaskets moved upon installation??
warped heads?,head gasket?
the oil and coolant smells like fuel
it eats a quart of oil and coolant every 200miles ...it feels like one of the cylinders is loading up with water or fuel or both once it warms up to 130 degrees.
i parked the car...need some help.
i'm gonna run a compression check in a few days.
oh yeah ,at first i thought it might be a plug wire of foul plug ,so i did a tune up..no luck.
![[Confused]](confused.gif)
Posts: 1276 | From: Long Beach C.A | Registered: Jul 2002
| :
|
|
street_illegal_stang
¯
Member # 1554
|
posted
quote:
Originally posted by street_illegal_stang:
coming up from the push rods???
i took off the intake a few months ago..Gaskets moved upon installation?
warped heads?,head gasket?i don't know.
the oil and coolant smells like fuel
it eats a quart of oil and coolant every 200miles ...it feels like one of the cylinders is loading up with water or fuel or both once it warms up to 130 degrees.
i parked the car...need some help.
i'm gonna run a compression check in a few days.
oh yeah ,at first i thought it might be a plug wire of foul plug ,so i did a tune up..no luck.
Posts: 1276 | From: Long Beach C.A | Registered: Jul 2002
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
Drain the oil ASAP.
Water in the oil will destroy the bearings....if you've driven it like this for any length of time the motor is probably toast. You'll know if you hear rod-knock.
Do a leak-down test on the cylinders if the compression test comes back okay. This will help diagnose were the water is leaking in.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4265 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
quote:
Originally posted by 93PONY:
Drain the oil ASAP.
Water in the oil will destroy the bearings....if you've driven it like this for any length of time the motor is probably toast. You'll know if you hear rod-knock.
Do a leak-down test on the cylinders if the compression test comes back okay. This will help diagnose were the water is leaking in.
![[Smile]](smile.gif) ..sounds like a good plan.
[ January 07, 2003, 10:41 PM: Message edited by: Black94 5.0 ]
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
Copello
¯
Member # 1534
|
posted
water and oil...smells like gas...sounds like new motor time.
--------------------
91 GT
73 RS Camaro
Posts: 1309 | From: San Mateo | Registered: Jul 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
