|
Author
|
Topic: Need frame work
|
89Stang
New Member
Member # 2050
|
posted
 
 
Hello everyone,
A new member, want to say hi and ask a couple of questions.
I recently purchased a 89 GT for cheap. The car is pretty tore up inside and out, so I slowly pulled out all the dents, replaced the fender bondo, primered.. and I found out that when the last owner got hit, the driver door was open and someone pushed the door into the fender well, and the A column is twisted.
Not bend but twisted inwards toward the engine compartment, just 10 or so degrees now that the door will not close without a slight gap. Worst is when you open the door, it hits the fender.
I was wondering if I will have to bring this in to a shop and how much this is going to set me back.
Thanks again.
Posts: 2 | From: Frisco | Registered: Oct 2002
| :
|
|
89Stang
New Member
Member # 2050
|
posted
Sorry, forgot to mention, I live in San Francisco and if I do need to take this to a shop, does anyone have any good recommendations?
Thanks again
Posts: 2 | From: Frisco | Registered: Oct 2002
| :
|
|
Primer GR40
¯
Member # 476
|
posted
welcome to the boards. youd better start calling some shops to get that fixed. i know of a real good shop but there across the bridge in San Rafael
[ October 31, 2002, 01:53 PM: Message edited by: Blown Mystic ]
--------------------
Superdupercharged Cobra
No Transmatic Notch
Posts: 2108 | Registered: Sep 2001
| :
|
|
ON N20
¯
Member # 1223
|
posted
sup bro,
in san bruno there is a chop called Five Star Auto body, ask for rich. (650) 952-5303 tell him rob with the silver maro sent you. He is hella good, he flipped my maro hardcore! L8R
rob
Posts: 52 | From: bruno 650 | Registered: Apr 2002
| :
|
|
PeNiNsula302
¯
Member # 1061
|
posted
ON N20...what do u drive? just wondering if ive seen you around...
Posts: 3423 | Registered: Mar 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
