|
Author
|
Topic: pi heads
|
3xblack GT
¯
Member # 1185
|
posted
 
 
anyone know of a cheap place i can get this set-up installed. Was wondering how much this would cost....parts and labor? heard it makes the biggest difference for a 96-98 GT
Posts: 449 | From: Hayward | Registered: Apr 2002
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
This is kinda expensive, but the place behind Sac mustang did a sweet job on one a while back, he races up at Sac raceway,so i looked into for my 98 Slug, parts and labor would be close to 4 G's the shop said! ![[Eek!]](eek.gif)
While your doin that might as well put some headers on it too! After that bolt on and some slicks you would be doin low 13's easy! ![[Big Grin]](biggrin.gif)
--------------------
2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
NvrGoFullRetard
CAFords OG
Member # 1633
|
posted
what parts r u plannin to buy? my motor is almost done and i should be runnin low, low 12's
--------------------
"formally 4.6 eatin gm's"
white 97gt n/a 320rwhp/325rwtq
01 sierra rcsb lsx 408 (murdered out)
03 ecsb sierra 6.0 on 22's
2011 Tahoe
Posts: 2759 | From: PITTSBURG/FAIRFIELD | Registered: Aug 2002
| :
|
|
StoplightWarrior
¯
Member # 211
|
posted
If you're planning on keeping your car...and if you ever want to get out of the 14's, you will need to do the headswap...
--------------------
2000 GT
couple bolt ons
Check out the website: peep it
Posts: 2952 | From: Bay Area, CA | Registered: Mar 2001
| :
|
|
O.G. Cobra
¯
Member # 747
|
posted
quote:
Originally posted by 98StangPower:
This is kinda expensive, but the place behind Sac mustang did a sweet job on one a while back, he races up at Sac raceway,so i looked into for my 98 Slug, parts and labor would be close to 4 G's the shop said!
While your doin that might as well put some headers on it too! After that bolt on and some slicks you would be doin low 13's easy!
for 4 grand you'd be better off selling your car and getting a 99-up GT...
Posts: 214 | Registered: Jan 2002
| :
|
|
99Flyer
¯
Member # 1528
|
posted
I know of a place where you can get bare 99 up heads for about $330 or so. You can get a Mod Max "9000 rpm" valve train for under $600 shipped (ask for TK at pro power in FL) ask if you need the #.Also can have heads assembled and polished with a 3 angle valve job for $325
--------------------
2021 Bronco Black Diamond Sasquatch
1971 Camaro 350 SC
1977 GMC Kingsley Class A
Posts: 415 | From: San Francisco | Registered: Jul 2002
| :
|
|
99Flyer
¯
Member # 1528
|
posted
$330 each, that is
Posts: 415 | From: San Francisco | Registered: Jul 2002
| :
|
|
1Sicgt
CAFords OG
Member # 714
|
posted
Ok, I bought a set of PI heads, but I need the new valves, rr's, full hardware, gaskets, and I am looking for Hot cams. Any of you guys know where to find these things? Also what are you thoughts about the new FMS high flow upper for the 4.6. It goes to a cobra TB but it is not a bullitt upper. Anyone know anything about this part yet?
--------------------
14 Focus TS ST3 full Stg3, ready for bigger Turbo
2003 Cobra Track Car
Posts: 8145 | From: Hitting the Apex | Registered: Jan 2002
| :
|
|
99gt-UJSTLST
¯
Member # 584
|
posted
quote:
Originally posted by 1sicgt:
Ok, I bought a set of PI heads, but I need the new valves, rr's, full hardware, gaskets, and I am looking for Hot cams. Any of you guys know where to find these things? Also what are you thoughts about the new FMS high flow upper for the 4.6. It goes to a cobra TB but it is not a bullitt upper. Anyone know anything about this part yet?
well FMS high flow upper ?
that i know of their is only 2 intakes you can swap the bullit and the svo but the svo has to be modyfied to make it work
--------------------
SOUTH BAY STANGS
MINOR BOLT ON'S
www.southbaystangs.com
Posts: 2558 | From: SAN JOSE CA | Registered: Nov 2001
| :
|
|
ihatethesesns
¯
Member # 684
|
posted
quote:
Originally posted by 1sicgt:
Ok, I bought a set of PI heads, but I need the new valves, rr's, full hardware, gaskets, and I am looking for Hot cams. Any of you guys know where to find these things? Also what are you thoughts about the new FMS high flow upper for the 4.6. It goes to a cobra TB but it is not a bullitt upper. Anyone know anything about this part yet?
So how much longer you think jon? Have you looked into the SHM cams? Send me an email with a number I can reach you at since your celly dont work. I want to take a look at those heads.
--------------------
" Friends come and go but enemies Accumulate"
'Fight Crime Shoot First'
Posts: 1283 | From: Toy Shop | Registered: Dec 2001
| :
|
|
1Sicgt
CAFords OG
Member # 714
|
posted
For my car. Spring. I want to take my time. Do everything right. So I am trying to line up all the parts before I start. My goal is to break 12's on a 281 2v n/a. No power adders at all. But I have been think lately about stroking the motor. Has anyone done this to a 281 yet? Was it good or bad? I saw kits to stroke it up to a 302. I am kinda curious how they would work. It would be kinda cool to say it's a 302 2v.
That intake I was looking at Steeda lists in there catalog flow 50% better that the original intake. I have the part number but, the catalog is in the other car. So I will post the specs for the intake and part numbers later.
--------------------
14 Focus TS ST3 full Stg3, ready for bigger Turbo
2003 Cobra Track Car
Posts: 8145 | From: Hitting the Apex | Registered: Jan 2002
| :
|
|
NvrGoFullRetard
CAFords OG
Member # 1633
|
posted
I NOW HAVE A 285CI 2V. U CAN STROKE A 4.6 ALL THE WAY UP TO A 318 BUT I DONT THINK U WOULD WANT TO GO THAT HIGH. I SEEN STROKER KITS IN THE 5.O MAGS. MINE IS A 285 BECAUSE IT IS BORED 20 OVER.IF U WANT I COULD HOOK U UP WITH THE GUY WHOS BUILDING MY MOTOR.HE COOL AND HE KNOWS WHAT HES DOING, AND HES SAYIN I SHOULD GO LOW 12'S N/A
NO PROBLEM.
--------------------
"formally 4.6 eatin gm's"
white 97gt n/a 320rwhp/325rwtq
01 sierra rcsb lsx 408 (murdered out)
03 ecsb sierra 6.0 on 22's
2011 Tahoe
Posts: 2759 | From: PITTSBURG/FAIRFIELD | Registered: Aug 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
